Datasheet

http://www.tracopower.com
Input Specifications
Input current no load /full load 5 Vin models: 30 mA / 260 mA typ.
12 Vin models: 15 mA / 110 mA typ.
24 Vin models: 8 mA / 55 mA typ.
Surge voltage (1 sec. max.) 5 Vin models: 9 V max.
12 Vin models: 18 V max.
24 Vin models: 30 V max.
Reverse voltage protection 0.3 A max.
Input filter internal capacitors
Output Specifications
Voltage set accuracy ±2 % (at 60% load)
Voltage balance (dual output models) ±1 % max.
Regulation
– Input variation 1.2 % / 1 % change Vin
– Load variation see graph below
Ripple and noise (20 MHz Bandwidth) 120 mVpk-pk max.
Temperature coefficient ± 0.02 % / °C
Short circuit protection limited 0.5 sec. max.
Capacitive load
33 µF max.
General Specifications
Temperature ranges – Operating (see also enclosed derating curve) –40 °C ... +85 °C (no derating)
– Storage –55 °C ... +125 °C
Humidity (non condensing) 95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217E) >2’000’000 h @ 25 °C
Isolation voltage (60sec) – Input/Output 1‘500 VDC
Isolation capacity –
Input/Output 40 pF typ.
Isolation resistance –
Input/Output >1‘000 Mohm
Switching frequency 100 kHz typ. (frequency modulation)
Frequency change over line and load ± 30 %
Physical Specifications
Case material epoxy molding compound
(flammability to UL 94V-0 rated)
Package weight single output models: 1.7 g (0.04 oz)
dual output models: 2.0 g (0.05 oz)
Reflow soldering profile as per IPC/JEDEC J-STD-020C
DC/DC Converters
TES 1 Series 1 Watt
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Page 2 of 3
Output voltage variation dependent on load (at nominal input voltage)
100%
50%0
0%
-10%
+10%
Deviation of Vout nom.
Load
Max.
Min.
Typicaly
5 VDC models:
100%
50%0
0%
-10%
+10%
Deviation of Vout nom.
Load
Max.
Min.
Typicaly
tbd
other models: