Datasheet

http://w ww.tracopower.com Page 5 of 6
Option Chassis Mount
DC/DC Converters
TEP 75WI Series 75 Watt
1.1
0.68
(28.0)
(17.3)
1.53
0.68
(38.8)
(17.3)
1.60 (40.6)
3.35
3.071
(85.0)
(78.0)
2.40
2.126
(61.0)
(54.0)
0.14
(3.5)
0.14
(3.5)
4 x Ø0.17 (4.3)
2.00 (50.8)
0.89 (22.2)
screw 1screw 3screw 2
TEP 75 module with chassis mount adabtor (suffix –CM or –CMF)
Suffix CM: Chassis mount adaptor
Dimensions in Inch, () = mm
Tolerances ±0.02 (±0.5)
Mounting hole pich tolerances ±0.01 (±0.25)
The screw 1 locked torque:MAX 11.2kgf-cm/1.10N-m
The screw 2 locked torque:MAX 5.2kgf-cm/0.51N-m
The screw 3 locked torque:MAX 12kgf-cm/1.18N-m
*Sense line to be connected
to the output either at the
module or at the load under
regard of polarity.
Please note that adaptors cannot be ordered as seperate
items but are factory assembled.
Suffix CMF: Chassis mount adaptor with EMI filter
For easy chassis mounting the converter modules can be supplied with an adaptor option consisting of a screw terminal connection
board (soldered to converter pins) and a chassis mount adaptor.
In addition this Chassis mount option is available with an EMI-filter (see EMI specification)
Pin
1
– Vin
2
NC
3
Remote On/Off
4
+ Vin
5
– Vout
6
– Sense*
7
Trim
8
+ Sense*
9
+ Vout
Connection
Weight: –CM 200 g ( 7. 0 5 o z )
Weight: –CMF 287 g (10.12oz )