Datasheet

ManualsBrandsTRACOPOWER ManualsPSU ComponentsDC/DC converter (print) 48 Vdc 3600 mA 100 W No. of outputs: 1 x

http://www.tracopower.com Page 1 of 5

DC/DC Converters

TEP 100WIR Series, 100 Watt

Features

◆

Compact metal package

◆ Ultra wide 4:1 input voltage ranges

8.5–36, 16.5–75, 43–160 VDC

◆ EN 50155 approval for railway

applications

◆ Very high efﬁciency up to 92%

◆ No minimum load

◆ Soft start

◆ Ajustable output voltage +10/-20%

◆ Sense line

◆ Remote On/Off input

◆ Under voltage lock-out circuit

◆ Reverse input voltage protection

◆ Over temperature protection

◆ Optional Heatsink

◆ Optional as chassis mount models with

screw terminal block and EMI Filter

◆ 3-year product warranty

The TEP 100WIR Series is a family of isolated high performance dc-dc converter

modules with ultra-wide 4:1 input voltage ranges which come in a rugged, sealed

industry standard half brick package.

A very high efﬁciency allows full power operation without forced air cooling at 60°C

This temperature can be increased to 70°C with optional mounted heatsink or up

to 85°C when mounted on an iron base plate. The very wide input voltage range

and reverse input voltage protection make these converters interesting solution for

battery operated systems. Typical applications are in telecom/datacom, industry

control and railway systems for on board power distribution.

These series is available in many optional designs on demand --> see options.

Order code Input voltage Output voltage Output current max. Efﬁciency typ.

TEP 100-2412WIR

12 VDC 8.4 A 90 %

TEP 100-2415WIR 8.5 – 36 VDC

24 VDC 4.2 A 90 %

TEP 100-2416WIR

(24 VDC nominal)

28 VDC 3.6 A 90 %

TEP 100-2418WIR

48 VDC 2.1 A 90 %

TEP 100-4812WIR

12 VDC 8.4 A 90 %

TEP 100-4815WIR 16.5 – 75 VDC

24 VDC 4.2 A 90 %

TEP 100-4816WIR

(48 VDC nominal)

28 VDC 3.6 A 92 %

TEP 100-4818WIR

48 VDC 2.1 A 91 %

TEP 100-7212WIR

12 VDC 8.4 A 90 %

TEP 100-7215WIR 43 – 160 VDC

24 VDC 4.2 A 90 %

TEP 100-7216WIR

(110 VDC nominal)

28 VDC 3.6 A 90 %

TEP 100-7218WIR

48 VDC 2.1 A 91 %

Standard Models

(Models pictured with optional heatsink)

TEP-HS1

Heat-sink for standard version (incl. mounting screws and thermal pad)

TEP-MK1

Din-rail mounting kit for chassis mount models (incl. mounting screws)

TCK-xxx

Common mode chokes for ﬁlter proposals to meet EN55022 class A/B --> see application note

on demand

Models with 3.3 VDC/~ 25 A or 5.0 VDC/~ 20 A or 15 VDC/~ 6.7 A output

Chassis mount models with screw terminal block

Chassis mount models with screw terminal block and input ﬁlter to meet EN 555022 class A

Negative (passive = Off) Remote On/Off function (standard is passive = On)

Options

Summary of content (5 pages)

PAGE 1
DC/DC Converters TEP 100WIR Series, 100 Watt Features ◆ Compact metal package ◆ Ultra wide 4:1 input voltage ranges 8.5–36, 16.
PAGE 2
DC/DC Converters TEP 100WIR Series 100 Watt Input Specifications Input current at no load (nominal input voltage) 24 Vin models: 25 mA typ. 48 Vin models: 20 mA typ. 110 Vin models: 10 mA typ. Start-up voltage 24 Vin models: 9.0 VDC max. 48 Vin models: 18 VDC max. 110 Vin models: 43 VDC max. Under voltage shut down (lock-out circuit) 24 Vin models: 7.3 – 8.1 VDC 48 Vin models: 15.5 – 16.3 VDC 110 Vin models: 33.0 – 36.0 VDC Surge voltage (1 sec. max.
PAGE 3
DC/DC Converters TEP 100WIR Series 100 Watt General Specifications Temperature ranges – Operating –40°C to +75°C (with derating) – Case temperature +115°C max. – Storage –55°C to +125°C Thermal impedance – without heat-sink 6.7°C/W – with heat-sink 4.7°C/W Power Derating – without heat-sink – with heat-sink – with iron base plate (19” x 3.5” x 0.063”) depending on installation! 3.3 %/K above +55°C 4.0 %/K above +65°C 6.
PAGE 4
DC/DC Converters TEP 100WIR Series 100 Watt General Specifications Casing material 24 / 48 Vin models: metal 110 Vin models: aluminium base-plate with plastic case Potting material silicone (UL94V-0 rated) Base material FR4 Dimensions TEP 100WIR module Pin-Out 1 5 2 6 Pin 0.19 (4.8) 8 4 9 1.90 (48.26) 1.00 (25.40) 3 0.70 (17.78) 7 0.30 Bottom view (7.62) 2.40 (61.0) 2.00 (50.80) 4 x M3 THD (trough hole) Weight: 105 g (3.70oz) (0.6) 0.023 0.
PAGE 5
DC/DC Converters TEP 100WIR Series 100 Watt Options (on demand) Chassis mount models with screw terminal block Chassis mount models with screw terminal block and input filter to meet EN 555022 class A TEP-MK1 DIN-rail clip for chassis mount models 1.33(33.8) 1.53(38.8) 1.87(47.5) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. January 14.