Datasheet

Page 6 of 6
J
enatschstrasse 1 · CH-8002 Zurich · Switzerland
Tel. [phone] · Fax [phone] · [e-mail] · www.tracopower.com
Chassis Mount Adaptor
DC/DC Converters
TEP 100 Series 100 Watt
Rev. 10/08
Specifications can be changed any time without notice.
1.10
0.68
(28.0)
(17.3)
1.18
0.68
(30.0)
(17.3)
1.31 (33.3)
3.35
3.071
(85.0)
(78.0)
2.40
2.126
(61.0)
(54.0)
0.14
(3.5)
0.14
(3.5)
4 x Ø0.17 (4.3)
1.90
(48.3)
1.02 (25.9)
TEP 100 module with chassis mount adabtor (suffix –CM or –CMF)
Suffix –CM: Chassis mount adaptor
Dimensions in Inch, () = mm
Tolerances ±0.02 (0.5)
Mounting hole pich tolerances ±0.01 (0.25)
Pin
1
– Vin
2
Case
3
Remote On/Off
4
+ Vin
5
– Vout
6
– Sense*
7
Trim
8
+ Sense*
9
+ Vout
Connection
*Sense line to be connected
to the output either at the
module or at the load under
regard of polarity.
Please note that adaptors cannot be ordered as seperate
items but are factory assembled.
Suffix –CMF: Chassis mount adaptor with EMI filter
For easy chassis mounting the converter modules can be supplied with an adaptor option consisting of a screw terminal connection
board (soldered to converter pins)and a chassis mount adaptor.
In addition this Chassis mount option is available with an EMI-filter(see EMI specification)