Datasheet

Application Note
Created by Traco Electronic AG Arp. www.tracopower.com Date: June 9
th
, 2010 / Rev.: 1.2 / Page 59 / 63
100W Single Output
Mechanical Data (continued)
Option: The terminal block type of TEP – CM
Option: The terminal block with an EMC filter type of TEP – CMF can meet the EMC characteristics.
A
ll dimensions in inches (mm
)
Tolerance: x.xx ±0.02 (x.x ±0.5)
x.xxx ±0.01 (x.xx ±0.25)
PIN CONNECTION
PIN Define Wire Range
1 -V
in
(GND) 14 AWG to 16 AWG
2 Case 14 AWG to 18 AWG
3 Remote on/off 14 AWG to 18 AWG
4 +V
in
(Vcc) 14 AWG to 16 AWG
5 -V
out
10 AWG to 12 AWG
6 -Sense 14 AWG to 18 AWG
7 V
adjust
14 AWG to 18 AWG
8 +Sense 14 AWG to 18 AWG
9 +V
out
10 AWG to 12 AWG
EXTERNAL OUTPUT TRIMMING
Output can be externally trimmed by using
the method shown below.
8
7
TRIM UP
R
U
7
6
TRIM DOWN
R
D