Datasheet

Jenatschstrasse 1 · CH-8002 Zurich · Switzerland
Tel. [phone] · Fax [phone] · [e-mail] · www.tracopower.com
Page 3 of 3
Industrial Power Supplies
TBL Series 15 to 150 Watt
Rev. 10/12
Specifications can be changed any time without notice.
Case Dimensions
Dimensions in [mm], () = Inch
Tolerances: ±0.5 mm (±0.02)
General Specifications
Protection class class II as per IEC/EN 61140
Case protection IP 20 (IEC 60529)
Environment – Vibration acc. IEC 60068-2-6; 3 axis, sine sweep, 10 – 55 Hz, 0.075 mm
– Shock acc. IEC 60068-2-27 3 axis, 15 g half sine, 11 ms
Enclosure material plastic FR2010-110C (UL 94V-0 rated)
Mounting DIN-rails as per EN 50022-35x15/7.5
(snap-on with self-locking spring or wall mounting
with bracket) (included)
Connection screw terminals with combi-type screw heads
for wire size 0.5 – 1.5 mm²
Installation instructions www.tracopower.com/products/tbl-inst.pdf
Environmental compliance – Reach www.tracopower.com/products/tbl-reach.pdf
– RoHS RoHS directive 2011/65/EU
Vadj
59.5
(2.34)
37.1 (1.46)
21.1
(0.83)
69.5 (2.74)
45.0 (1.77)
89.5 (3.52)
54.5 (2.15) W
Description Wire size
AC Input
all models: L, N only (2 pin terminal) AWG 26 – 16 / 1.5 mm² max.
DC Output
15 – 30 W models: single terminal AWG 26 – 14 / 1.5 mm² max.
DC Output
60 – 150 W models: double terminal AWG 26 – 14 / 1.5 mm² max.
Wiring
Model Width (W)
mm (inch)
Weigth
g (oz)
TBL 015
26.3 (1.04) 100 (3.53)
TBL 030
52.5 (2.07) 160 (5.64)
TBL 060
70.0 (2.76 230 (8.11)
TBL 090
105.0 (4.13) 340 (12.0)
TBL 150
175 (6.89) 625 (22.0)
Wall Mounting Bracket
Instead on a DIN-rail, the modules can be also mounted on a chassis or wall with help
of a mounting bracket which is supplied as standard with each power supply