Datasheet

http://www.tracopower.com Page 2 of 4
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Input Specifications
Input voltage +10.8 to +16.5 VDC
Reserve voltage protection none
Conducted noise (input) internal filter
Output Specifications
Voltage set accuracy ±5 %
Voltage adjustement range 0 – 100 %
(adjustable with external voltage 0 to +6 VDC or with 5 kOhm variable resistor)
Remote On/Off control On = pin 2 to pin 5 open
Off = pin 2 to pin 5 short
Regulation – Input variation Vin min. to Vin max. 0.01 % max.
– Load variation 0–100% 0.01 % max.
Ripple and noise (20 MHz Bandwidth) 100 mVpk-pk typ.
Temperature coefficient ±0.01 %/K
Stability 0.05 % 8h after warm-up time
Output current limitation 110 % of lout max., constant current
Short circuit protection continuous
General Specifications
Temperature ranges – Operating –10°C to +75°C
– Case temperature +90°C max.
– Storage –25°C to +75°C
Derating 4 %/K above 50°C
Humidity (non condensing) 30 – 95 % rel H max.
Efficiency 60 – 65 %
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >300‘000 h
Isolation (Input/Output) – Voltage none
Switching frequency 90 kHz typ. (fixed)
Vibration 5 – 10 Hz amplitude 10 mm pk-pk
10 – 55 Hz acceleration 2 G
Thermal shock acceleration 20 G max. time 11 ms.
Environmental compliance – Reach
www.tracopower.com/products/phv-reach.pdf
– RoHS RoHS directive 2011/65/EU
Physical Specifications
Casing material Steel chrome-nickel plated
Weight 65 g (2.29 oz)
Soldering temperature max. 260°C / 10 sec.
High Voltage Power Supplies
PHV Series 3.5 – 5 Watt