Datasheet

http://www.tracopower.com Page 4 of 9
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Industrial Power Supplies
TSP Series 70–600 Watt
General Specifications
Environment – Vibration acc. IEC 60068-2-6; 3 axis, sine sweep, 10 – 55 Hz, 1 g, 1 oct/min
– Shock acc. IEC 60068-2-27 3 axis, 15 g half sine, 11 ms
Enclosure material aluminium (chassis) / stainless steel (cover)
Mounting – DIN-rail mounting for DIN-rails as per EN 50022-35x15/7.5
(snap-on with self-locking spring)
– Wall mounting (option) with wall mounting bracket - see page 9
Connection detachable screw terminals (plugs included)
2 terminals per output
Remote On/Off connection – 2 pin molex male terminal KK series mating connector information (cable not included)
www.tracopower.com/products/tsp-rc-cable.pdf
Installation instructions www.tracopower.com/overview/tsp
Output Power Derating
Temperature [°C]
40
50
60
70
Output Power [% Pmax]
40 50 60 70
In
p
ut Volta
g
e [VAC]
40
50
60
Output Power [% Pmax]
80
90
100
A) Output Power Derating
vs Ambient Temperature
70
80
90
100
85
90
100 110 115 132 187 230 264
B) Output Power Derating
vs Input Voltage
-25
TSP 070
TSP 140
TSP 090
TSP 180
TSP 360
TSP 600