Datasheet

Input Voltage
- AC Range
85 - 264 VAC (Full Range)
- DC Range
120 - 370 VDC (designed for, no certification)
Input Frequency
47 - 63 Hz
Input Current
- Full Load & Vin = 230 VAC
950 mA max.
- Full Load & Vin = 115 VAC
1650 mA max.
Power Consumption
- at no Load
150 mW max. (Ready to meet ErP directive)
Input Inrush Current
- at 230 VAC
60 A max.
Input Protection
T 3.15 A / 250 VAC (Internal Fuse in L & N)
Output Voltage Adjustment
±10% (by trim potentiometer) (only Output 1)
Output power must no exceed rated power!
Voltage Set Accuracy
±1% max. (Output 1)
±2% max. (Output 2 and 3))
Regulation
- Input Variation (Vmin - Vmax)
single output models:
0.2% max.
dual output models:
0.2% max.
triple output models:
0.2% max.
- Load Variation (0 - 100%)
single output models:
0.5% max.
0.7% max. (5 VDC model)
dual output models:
0.5% max. (Output 1)
1.5% max. (Output 2)
triple output models:
0.5% max. (Output 1)
1.5% max. (Output 2)
0.7% max. (Output 3)
- Cross Regulation
(25% / 100% asym. load)
dual output models:
1.5% max.
triple output models:
1.5% max.
Ripple and Noise
(20 MHz Bandwidth)
- single output
5 VDC model:
75 mVp-p typ. (with 10 µF X7R)
12 VDC model:
75 mVp-p typ. (with 10 µF X7R)
15 VDC model:
75 mVp-p typ. (with 10 µF X7R)
24 VDC model:
75 mVp-p typ. (with 1 µF X7R)
- dual output
12 / 5 VDC model:
120 / 100 mVp-p typ. (with 10 µF X7R)
15 / 5 VDC model:
150 / 100 mVp-p typ. (with 10 µF X7R)
24 / 5 VDC model:
240 / 100 mVp-p typ. (with 10 µF X7R)
- triple output
12 / 5 / -12 VDC model:
120 / 100 / 120 mVp-p typ. (with 10 µF X7R)
15 / 5 / -15 VDC model:
150 / 100 / 150 mVp-p typ. (with 10 µF X7R)
24 / 5 / 12 VDC model:
240 / 100 / 120 mVp-p typ. (with 10 µF X7R)
Capacitive Load
- single output
5 VDC model:
20'000 µF max.
12 VDC model:
4'520 µF max.
15 VDC model:
2'900 µF max.
24 VDC model:
1'130 µF max.
- dual output
12 / 5 VDC model:
2'500 / 3'000 µF max.
15 / 5 VDC model:
1'200 / 3'000 µF max.
24 / 5 VDC model:
625 / 3'000 µF max.
- triple output
12 / 5 / -12 VDC model:
2'500 / 3'000 / 500 µF max.
15 / 5 / -15 VDC model:
1'200 / 3'000 / 500 µF max.
24 / 5 / 12 VDC model:
625 / 3'000 / 500 µF max.
Minimum Load
not required
0.5 W for Vout1 and Vout2 if Vout3 = Full Load
Temperature Coefficient
±0.02 %/K
Hold-up Time
- at 115 VAC
16 ms min.
Start-up Time
- at 230 VAC
1'000 ms max.
Output Current Limitation
120 - 160% of Iout max.
Short Circuit Protection
Continuous, automatic recovery
Overvoltage Protection
125 - 140% of Vout nom. (only Output 1)
Transient Response
- Response Deviation
3% max. (50% to 75% Load Step) (Output 1)
- Response Time
600 µs typ. (50% to 75% Load Step) (Output 1)
Input Specifications
Output Specifications
TPP 65 Series, 65 Watt
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
March 19, 2019
Page 2 / 5