Datasheet

Input Voltage
- AC Range
85 - 264 VAC (Full Range)
- DC Range
120 - 370 VDC (Designed for, no certification)
Input Frequency
47 - 63 Hz
Power Consumption
- at no Load
150 mW max. (Ready to meet ErP directive)
Input Inrush Current
- at 230 VAC
25 A max.
- at 115 VAC
15 A max.
Input Protection
T 1.0 A / 250 V
Input Specifications
Voltage Set Accuracy
±2% max.
Regulation
- Input Variation (Vmin - Vmax)
1% max.
- Load Variation (0 - 100%)
1% max.
Output Current peak
<30 s with maximum duty cycle of 10%, aver-
age output power must not exceed 3 W
Ripple and Noise
(20 MHz Bandwidth)
70 mVp-p max.
Capacitive Load
3.3 VDC model:
1'200 µF max.
5 VDC model:
820 µF max.
9 VDC model:
470 µF max.
12 VDC model:
330 µF max.
15 VDC model:
270 µF max.
24 VDC model:
180 µF max.
Minimum Load
Not required
Temperature Coefficient
±0.05 %/K max.
Start-up Time
- at 230 VAC
200 ms max.
- at 115 VAC
200 ms max.
Start-up Overshoot Voltage
5% max.
Short Circuit Protection
Continuous, Automatic recovery
Overload Protection
Foldback Mode
Output Current Limitation
135% min. of Iout max.
150% typ. of Iout max.
Overvoltage Protection
125% typ. of Vout nom.
190% max. of Vout nom.
(Zener Diode Clamp)
Output Specifications
Safety Standards
- IT / Multimedia Equipment
IEC 60950-1
EN 60950-1
UL 60950-1
CSA-C22.2, No 60950-1
- Household
IEC 60335-1
- Certification Documents
www.tracopower.com/overview/tmps03
Protection Class
Class II Prepared: Reinforced Insulation
Pollution Degree
PD 2
Over Voltage Category
OVC II
Safety Specifications
TMPS 03 Series, 3 Watt
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
July 3, 2019
Page 2 / 4