Datasheet

EMC Immunity
EN 55024 (IT Equipment)
- Electrostatic Discharge
Air:
EN 61000-4-2, ±8 kV, perf. criteria A
Contact:
EN 61000-4-2, ±6 kV, perf. criteria A
- RF Electromagnetic Field
EN 61000-4-3, 10 V/m, perf. criteria A
- EFT (Burst)
EN 61000-4-4, ±2 kV, perf. criteria A
- Surge
EN 61000-4-5, ±1 kV, perf. criteria A
Ext. Input Component:
Capacitor: 220 µF / 100 V
- Conducted RF Disturbances
EN 61000-4-6, 10 Vrms, perf. criteria A
- PF Magnetic Field
EN 61000-4-8, 3 A/m, perf. criteria A
Relative Humidity
95% max. (non condensing)
Temperature Ranges
- Operating Temperature
–40°C to +80°C
- Case Temperature
+95°C max.
- Storage Temperature
–55°C to +125°C
Power Derating
- High Temperature
4 %/K above 70°C
Cooling System
Natural convection (20 LFM)
Remote Control
- Current Controlled Remote
On: open circuit
Off: 2 to 4 mA current
- Off Idle Input Current
3 mA max.
Altitude During Operation
5'000 m max.
Switching Frequency
100 kHz min. (PFM)
Insulation System
Functional Insulation
Isolation Test Voltage
- Input to Output, 60 s
1'500 VDC
- Input to Output, 1 s
1'800 VDC
Isolation Resistance
- Input to Output, 500 VDC
1'000 MOhm min.
Isolation Capacitance
- Input to Output, 100 kHz, 1 V
500 pF typ.
Reliability
- Calculated MTBF
6'430'000 h (MIL-HDBK-217F, ground benign)
Moisture Sensitivity (MSL)
Level 2 (J-STD-033C)
Washing Process
Not allowed (non-hermetical product)
Housing Material
Non-conductive Plastic (UL94 V-0 rated)
Pin Material
Tinned Copper
Soldering Profile
Reflow Soldering (J-STD-020E)
Connection Type
SMD (Surface-Mount Device)
Weight
3.5 g
Environmental Compliance
- Reach
www.tracopower.com/info/reach-declaration.pdf
- RoHS
www.tracopower.com/info/rohs-declaration.pdf
General Specifications
Supporting Documents
Overview Link (for additional Documents)
www.tracopower.com/overview/tmr2wism
TMR 2WISM Series, 2 Watt
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
June 17, 2019
Page 3 / 4