Datasheet

http://w ww.tracopower.com Page 2 of 5
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
AC/DC Power Modules
TMM 24 Series 24 Watt
Input Specifications
Input voltage – nominal 100 – 240 VAC
– AC range (universal input) 85 – 264 VAC
– DC range 120 – 370 VDC
Input frequency 47 – 440 Hz
Input current at full load (115 VAC / 230 VAC nominal input) 5.0 VDC model: 285 mA / 170 mA typ.
other models: 425 mA / 255 mA typ
Leakage current 80 µA typ.
No-load power consumption <0.3 W
Internal fuse T2A 250VAC (both life and neutral)
Output Specifications
Voltage set accuracy ±2%
Minimum load no minimum load required
Regulation – Input variation 0.5% typ.
– Load variation (0-100%) single output models: 0.5% typ.
dual output models: 2.5% typ.
Temperature coefficient 0.02 %/°C
Ripple and noise (20 MHz bandwidth) 5.0 VDC model: <1.8% of Vout [Vp-p] max.
other models: <1.3% of Vout [Vp-p] max.
Current limitation above 105 % of rated output current.
hiccup, auto recovery
Overvoltage protection by Zehner diode (main output only) 120 % of Vout typ.
Short circuit protection continous
Max. capacitive load 5.0 VDC model: 2200 µF
12 VDC model: 1000 µF
15 VDC model: 680 µF
24 VDC model: 480 µF
±12 VDC model: 470 µF (each output)
±15 VDC model: 330 µF (each output)