Datasheet

Outline Dimensions
Standard pinning
Optional models with alternative pinning, adjustable output and/or remote-control function
THM 10 Series, 10 Watt
12
2324
1
15 13
Bottom view
15.24
2.54
20.3
(0.10)
(0.60)
(0.80)
10.2
(0.40)
3.8
(0.15)
2.54 20.32 2x2.54
2.0
31.8
(0.10)
(0.80)
(2x0.1)
(0.08)
(1.25)
11
Dimensions in mm (inch)
Tolerances ±0.5 (±0.02)
Pin Ø 0.6 ±0.1 (0.024 ±0.004)
Pin pich tolerances ±0.25 (±0.01)
Pinout
Pin Single Output Dual Output
1
+Vin (Vcc) +Vin (Vcc)
11
No pin Common
12
–Vout No pin
13
+Vout –Vout
15
No pin +Vout
23
–Vin (GND) –Vin (GND)
24
–Vin (GND) –Vin (GND)
11
2223
2
16 14
Bottom view
15.24
2.54
20.3
(0.10)
(0.60)
(0.80)
10.2
(0.40)
3.8
(0.15)
2.54 15.24 2.54
2.54
31.8
(0.10)
(0.60)
(0.10)
(0.10)
(1.25)
1
2.0
(0.08)
2.54
(0.10)
10
Dimensions in mm (inch)
Tolerances ±0.5 (±0.02)
Pin Ø 0.6 ±0.1 (0.024 ±0.004)
Pin pich tolerances ±0.25 (±0.01)
NC: No connection
*If Remote or Trim is not selected there is no
pin on corresponding number.
Remark:
No optional pinning for 5 Vin models. Corres-
ponding parts are with THM 10WI series by
default.
see
www.tracopower.com/overview/thm10wi
Pinout
Pin Single Output Dual Output
1
No pin*/Remote No pin*/Remote
2
–Vin (GND) –Vin (GND)
10
No pin*/Trim No pin*/Trim
11
NC –Vout
14
+Vout +Vout
16
–Vout Common
22
+Vin (Vcc) +Vin (Vcc)
23
+Vin (Vcc) +Vin (Vcc)
© Copyright 2019 Traco Electronic AG Specifications can be changed without notice.
www.tracopower.com
Rev. September 16, 2019
Page 5 / 5