Datasheet

Application Note
Created by Traco Electronic AG Arp. www.tracopower.com Date: July 5
th
, 2012 / Rev.: 2.0 / Page 43 / 44
3W SINGLE & DUAL
PartNumberStructure
Model
Number
Input
Range
(VDC)
Output
Voltage
(VDC)
Max. Output
Current
(mA )
Input Current
at Full Load
(1)
(mA )
Efficiency
(2)
(%)
THL 3-2410WI 9-36 3.3 600 110 75
THL 3-2411WI 9-36 5 600 160 78
THL 3-2412WI 9-36 12 250 156 80
THL 3-2413WI 9-36 15 200 156 80
THL 3-2412WI 9-36 24 125 156 80
THL 3-2421WI 9-36 ±5 ±300 162 77
THL 3-2422WI 9-36 ±12 ±125 156 80
THL 3-2423WI 9-36 ±15 ±100 156 80
THL 3-4810WI 18-75 3.3 600 55 75
THL 3-4811WI 18-75 5 600 80 78
THL 3-4812WI 18-75 12 250 78 80
THL 3-4813WI 18-75 15 200 78 80
THL 3-4812WI 18-75 24 125 78 80
THL 3-4821WI 18-75 ±5 ±300 81 77
THL 3-4822WI 18-75 ±12 ±125 78 80
THL 3-4823 18-75 ±15 ±100 78 80
Note 1. Maximum value at nominal input voltage and full load of standard type.
Note 2. Typical value at nominal input voltage and full load.
SafetyandInstallationInstruction
Fusing Consideration
Caution: This power module is not internally fused. An input line fuse must always be used. This encapsulated
power module can be used in a wide variety of applications, ranging from simple stand-alone operation to an
integrated part of sophisticated power architecture. To maximum flexibility, internal fusing is not included; however,
to achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a
normal-blow fuse in 24Vin with maximum rating of 1500mA and in 48Vin with maximum rating of 800mA. Based on
the information provided in this data sheet on Inrush energy and maximum dc input current; the same type of fuse
with lower rating can be used. Refer to the fuse manufacturer’s data for further information.