Datasheet

ManualsBrandsTraco Power ManualsBoard Mounted DC / DC ConvertersDC/DC Converter 10W 15V 330mA

http://www.tracopower.com Page 1 of 4

DC/DC Converters

THL 10WI Series, 10 Watt

Features

◆ 10 Watt in 1” x 1” package

◆ Shielded metal case with isolated

baseplate

◆ Ultrawide 4:1 input voltage ranges

◆ Remote On/Off control

◆ Operating temp. range –40°C to +75°C

and up to +85°C with heat-sink

◆ I/O isolation voltage 1500 VDC

◆ Input ﬁlter meets EN 55022 class A

without external components

◆ Cost optimized design

◆ Industry standard pinout

◆ 3-year product warranty

The THL 10WI is a series of general purpose 10 Watt dc/dc-converters packed in

the compact 1” x 1” case and is a pin to pin replacement for the popular 1” x 2”

size products. The industrial standard pinout, the ultra wide 4:1 input voltage range

and the input ﬁlter that meets EN 55022 Class A without external components make

these converters easy to design in and suitable for to cost optimize many existing

and new applications.

The models have a remote On/Off control, short circuit and overvoltage protection

and are applicable in temperature ranges of up to +75°C or +85°C with optional

mounted heat sink. Typical applications are instrumentation, distributed power ar-

chitectures in communication and industrial electronics.

Order code Input voltage range Output voltage Output current max. Efﬁciency typ.

THL 10-2410WI

3.3 VDC 2200 mA 86 %

THL 10-2411WI

5.1 VDC 2000 mA 84 %

THL 10-2412WI

12 VDC 830 mA 86 %

THL 10-2413WI 9 – 36 VDC

15 VDC 660 mA 87 %

THL 10-2415WI

(24 VDC nominal)

24 VDC 410 mA 86 %

THL 10-2421WI

±5.0 VDC ±1000 mA 84 %

THL 10-2422WI

±12 VDC ±410 mA 86 %

THL 10-2423WI

±15 VDC ±330 mA 87 %

THL 10-4810WI

3.3 VDC 2200 mA 85 %

THL 10-4811WI

5.1 VDC 2000 mA 84 %

THL 10-4812WI

12 VDC 830 mA 86 %

THL 10-4813WI 18 – 75 VDC

15 VDC 660 mA 87 %

THL 10-4815WI

(48 VDC nominal)

24 VDC 410 mA 86 %

THL 10-4821WI

±5.0 VDC ±1000 mA 84 %

THL 10-4822WI

±12 VDC ±410 mA 86 %

THL 10-4823WI

±15 VDC ±330 mA 87 %

Models

Scheme

UL 60950-1UL 60950-1

pending

226037

Summary of content (4 pages)

PAGE 1
DC/DC Converters THL 10WI Series, 10 Watt Features ◆ 10 Watt in 1” x 1” package ◆ Shielded metal case with isolated ing nd e p CB Scheme 226037 UL 60950-1 UL 60950-1 baseplate ◆ Ultrawide 4:1 input voltage ranges ◆ Remote On/Off control ◆ Operating temp.
PAGE 2
DC/DC Converters THL 10WI Series 10 Watt Input Specifications Input current at no load (at nominal input voltage) 24 V models: 30 mA typ. 48 V models: 20 mA typ. Input current at full load (at nominal input voltage) 24 V; 3.3 VDC 24 V; other 48 V; 3.3 VDC 48 V; other models: models: models: models: 400 mA typ. 500 mA typ.. 200 mA typ. 250 mA typ. Start-up voltage / under voltage lockout 24 V models: 9 VDC / 8.
PAGE 3
DC/DC Converters THL 10WI Series 10 Watt General Specifications Temperature ranges – – – – Power derating – Operating without heat sink 2.5 %/K above +60°C – Operating with heat sink 3.5 %/K above +70°C Thermal inpedance – Natural convection 18.2 K/W – Natural convection with heat sink 15.8 K/W Operating without heat sink Operating with heat sink Case temperature Storage –40°C to +75°C (with derating) –40°C to +85°C (with derating) +100°C max.
PAGE 4
DC/DC Converters THL 10WI Series 10 Watt Outline Dimensions 7.62 5.08 (0.3) (0.2) 3 6.0 10.2 2.5 10.16 10.16 (0.24) (0.4) (0.1) (0.4) (0.4) (1.0) 2.5 4 5 (0.1) Bottom view 25.4 (0.8) 20.32 1 2 6 Pin-Out Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 –Vin (GND) –Vin (GND) 3 + Vout + Vout 4 No pin Common 5 –Vout –Vout 6 Remote On/Off 25.4 (1.0) Dimensions in [mm], () = Inch Pin diameter ø 1.0 (0.04) Pin pitch tolerances: ±0.25 (±0.01) Tolerances: ±0.5 (±0.