Datasheet

ManualsBrandsTraco Power ManualsBoard Mounted DC / DC ConvertersDC/DC Converter 10W 5.1V 2A

http://www.tracopower.com Page 1 of 4

DC/DC Converters

THL 10 Series, 10 Watt

Features

◆

10 Watt in 1” x 1” package

◆ Shielded metal case with isolated

baseplate

◆ Wide 2:1 input voltage ranges

◆ Operating temp. range –40°C to +80°C

and up to +85°C with heat-sink

◆ I/O isolation voltage 1500 VDC

◆ Input ﬁlter meets EN 55022 class A

without external components

◆ Cost optimized design

◆ Industry standard pinout

◆ 3-year product warranty

The THL 10 is a series of general purpose 10 Watt dc/dc-converters packed in the

compact 1” x 1” case and is a pin to pin replacement for the popular 1” x 2” size

products. The industrial standard pinout, the wide 2:1 input voltage range and the

input ﬁlter that meets EN 55022 Class A without external components make these

converters easy to design in and suitable for to cost optimize many existing and new

applications.

The models have short circuit and overvoltage protection and are applicable in tem-

perature ranges of up to +80°C or +85°C with optional mounted heat sink. Typical

applications are instrumentation, distributed power architectures in communication

and industrial electronics.

Order code Input voltage range Output voltage Output current max. Efﬁciency typ.

THL 10-1210

3.3 VDC 2500 mA 82 %

THL 10-1211

5.1 VDC 2000 mA 85 %

THL 10-1212

12 VDC 830 mA 87 %

THL 10-1213 9 – 18 VDC

15 VDC 670 mA 88 %

THL 10-1221

(12 VDC nominal)

±5.0 VDC ±1000 mA 84 %

THL 10-1222

±12 VDC ±416 mA 87 %

THL 10-1223

±15 VDC ±333 mA 87 %

THL 10-2410

3.3 VDC 2500 mA 83 %

THL 10-2411

5.1 VDC 2000 mA 85 %

THL 10-2412

12 VDC 830 mA 87 %

THL 10-2413 18 – 36 VDC

15 VDC 670 mA 89 %

THL 10-2421

(24 VDC nominal)

±5.0 VDC ±1000 mA 85 %

THL 10-2422

±12 VDC ±416 mA 88 %

THL 10-2423

±15 VDC ±333 mA 89 %

THL 10-4810

3.3 VDC 2500 mA 83 %

THL 10-4811

5.1 VDC 2000 mA 85 %

THL 10-4812

12 VDC 830 mA 89 %

THL 10-4813 36 – 75 VDC

15 VDC 670 mA 89 %

THL 10-4821

(48 VDC nominal)

±5.0 VDC ±1000 mA 86 %

THL 10-4822

±12 VDC ±416 mA 87 %

THL 10-4823

±15 VDC ±333 mA 88 %

Models

Scheme

UL 60950-1UL 60950-1

pending

226037

Summary of content (4 pages)

PAGE 1
DC/DC Converters THL 10 Series, 10 Watt Features ◆ 10 Watt in 1” x 1” package ◆ Shielded metal case with isolated ing nd e p CB Scheme 226037 UL 60950-1 UL 60950-1 baseplate ◆ Wide 2:1 input voltage ranges ◆ Operating temp.
PAGE 2
DC/DC Converters THL 10 Series 10 Watt Input Specifications Input current at no load (at nominal input voltage) Input current at full load (at nominal input voltage) 12 24 48 12 Vin models: 15 mA typ. 24 Vin models: 12 mA typ. 48 Vin models: 10 mA typ. Vin; 3.3 VDC 12 Vin; other Vin; 3.3 VDC 24 Vin; other Vin; 3.3 VDC 48 V; other models: models: models: models: models: models: 800 mA typ. 1000 mA typ. 400 mA typ. 500 mA typ. 200 mA typ. 250 mA typ.
PAGE 3
DC/DC Converters THL 10 Series 10 Watt General Specifications Temperature ranges – – – – Power derating – Operating without heat sink 2.5 %/K above +60°C – Operating with heat sink 3.5 %/K above +70°C Operating without heat sink Operating with heat sink Case temperature Storage –40°C to +80°C (with derating) –40°C to +85°C (with derating) +100°C max. –50°C to +125°C Humidity (non condensing) 95 % rel H max.
PAGE 4
DC/DC Converters THL 10 Series 10 Watt Outline Dimensions 7.62 5.08 (0.3) (0.2) 2.5 3 6.0 10.2 2.5 10.16 10.16 (0.24) (0.4) (0.1) (0.4) (0.4) (0.1) 4 5 (1.0) (0.8) Bottom view 25.4 1 2 20.32 Pin-Out Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 –Vin (GND) –Vin (GND) 3 + Vout + Vout 4 No pin Common 5 –Vout –Vout 25.4 (1.0) Dimensions in [mm], () = Inch Pin diameter ø 1.0 (0.04) Pin pitch tolerances: ±0.25 (±0.01) Tolerances: ±0.5 (±0.