Datasheet

TES 2N Series
Application Note
http://www.tracopower.com Page 2 of 40
Absolute Maximum Rating
Parameter Model Min Max Unit
Input Voltage
VDC
Input Surge Voltage ( 1 sec. ) 5VDC Input Models -0.7 11
12VDC Input Models -0.7 25
24VDC Input Models -0.7 50
48VDC Input Models -0.7 100
Operating Ambient Temperature
All
Without Derating -40 +70
With Derating -40 +85
Operating Case Temperature All --- +90
Storage Temperature All -50 +125
Output Specication
Parameter Model Min Nominal Max Unit
Output Voltage
(V
in
=V
in nom
; Full Load; T
A
=25)
TES 2N-xx10 3.234 3.3 3.366
VDC
TES 2N-xx11 4.9 5 5.1
TES 2N-xx12 11.76 12 12.24
TES 2N-xx13 14.7 15 15.3
TES 2N-xx21 ±4.9 ±5 ±5.1
TES 2N-xx22 ±11.76 ±12 ±12.24
TES 2N-xx23 ±14.7 ±15 ±15.3
Output Regulation
Line (V
in min
to V
in max
at Full Load)
---
±0.3 ±0.5
%
Output Regulation
Load (25% to 100% of Full Load) --- ±0.5 ±0.75 %
Output Ripple & Noise
Peak-to-Peak (20MHz bandwidth) --- 30 50 mV pk-pk
Temperature Coefcient All --- ±0.01 ±0.02 %/
Dynamic Load Response
All
(V
in
= V
in nom
; TA=25Load step change form
75% to 100% or 100% to 75% of full Load)
Peak Deviation --- ±3 ±5 %
Recovery Time (V
out
< 10% peak deviation) --- 100 300 μS
Output Current
TES 2N-xx10 125 --- 500
mA
TES 2N-xx11 100 --- 400
TES 2N-xx12 42 --- 167
TES 2N-xx13 33 --- 134
TES 2N-xx21 ±50 --- ±200
TES 2N-xx22 ±21 --- ±83
TES 2N-xx23 ±17 --- ±67
Output Short Circuit Protection All Continuous