Datasheet

TES 2M Series
Application Note
http://www.tracopower.com Page 1 of 26
TES 2M Series
2W, Miniature SMD, Single & Dual Output DC/DC Converters
Features
►Ultra-compact SMD-Package
►I/O-isolation 4000VACrms
►Operating Temp. Range –25°C to +80°C
►Qualied for leadfree Reow Solder Process according IPC-J-
STD-020D
►Tape & Reel Package available
►3 Years Product Warranty
Applications
► Distributed power architectures
► Workstations
► Computer equipment
► Communications equipment
General Descripon
The TRACO TES 2M series is a new range of 2W DC/DC-converter modules providing a very high I/O-isolation voltage of 4000
VAC. The product comes in a small SMD-package. There are 15 models available with 5V, 12V or 24VDC input and single-or dual-
output voltages.
The TES 2M DC/DC converters offer an economical solution for many applications in instrumentation, industrial controls, medical
equipment and everywhere where a certied supplementary- or reinforced insulation system is required to comply with requested
safety standards.
Table of contents
Absolute Maximum Rating……………… P2 Short Circuitry Protection………………… P21
Output Specication…………………… P2 Mechanical Data…………………………… P22
Input Specication……………………… P3 Recommended Pad Layout Single & Dual P23
General Specication…………………… P4 Packaging Information……………………… P23
Characteristic Curves…………………… P5 Soldering and Reow Consideration……… P24
Testing Congurations………………… P20 Part Number Structure……………………… P25
EMC Considerations…………………… P21 Safety and Installation Instruction………… P26
Input Source Impedance………………… P21 MTBF and Reliability……………………… P26