Datasheet

ManualsBrandsTraco Power ManualsBoard Mounted DC / DC ConvertersDC/DC Converter 2W 5V 400mA

Speciﬁ cations can be changed any time without notice.

enatschstrasse 1 · CH-8002 Zurich · Switzerland

Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · info@traco.ch · www.tracopower.com

Page 1 of 1

Tube, Tape & Reel dimension - Single and Dual Output Models

Rev. 01/10

Packaging

TES-2M Series

Dimensions in [mm], Tolerance ±0.1mm

Optional Packaging - Tape & Reel

Standard Packaging - Tube

- Specifications according IEC 286-3

- 1 Reel contains 200 converters

- Use appendix «-TR» on order code

- 1 Tube contains 10 converters

15.4

20.9

2.1

11.4

1.6

12.9

0.7

9.8

270.0

± 2 . 0

3.7

7.7

13.45

0.25

330.0

2.2

48.7

99.1

1.75

44.0

4.0

18.3

9.5

9.2

24.3

20.2

28.0

0.15

2.0

1.5

1.7

Summary of content (27 pages)

PAGE 1
Packaging TES-2M Series Tube, Tape & Reel dimension - Single and Dual Output Models 0.7 Standard Packaging - Tube 15.4 270.0± 2.0 2.1 9.8 7.7 1.6 3.7 11.4 - 1 Tube contains 10 converters 12.9 20.9 48.7 Optional Packaging - Tape & Reel 2.2 - Specifications according IEC 286-3 - 1 Reel contains 200 converters 2.0 24.3 6 50 44.0 0.3 20.2 1. 5 1.75 4.0 99.1 330.0 13.45 0.25 - Use appendix «-TR» on order code 1.7 9.2 1.5 28.0 0.15 9.5 50 6 50 18.
PAGE 2
Application Note TES 2M Series TES 2M Series 2W, Miniature SMD, Single & Dual Output DC/DC Converters Features ►Ultra-compact SMD-Package ►I/O-isolation 4000VACrms ►Operating Temp.
PAGE 3
Application Note TES 2M Series Absolute Maximum Rating Parameter Model Min Max 5VDC Input Models -0.7 9 12VDC Input Models -0.7 18 24VDC Input Models -0.7 30 All -25 +75 -25 +80 Unit Input Voltage Input Surge Voltage ( 1 sec. ) VDC Operating Ambient Temperature Without Derating With Derating ℃ Operating Case Temperature All --- +90 ℃ Storage Temperature All -50 +125 ℃ Output Specification Parameter Model Min Nominal Max Unit --- ±1.2 ±1.
PAGE 4
Application Note TES 2M Series Output Specification (Continued) Parameter Temperature Coefficient Output Current Output Short Circuit Protection Model Min Nominal Max Unit All --- ±0.01 ±0.02 %/℃ TES 2-xx11M 8 --- 400 TES 2-xx12M 3 --- 165 TES 2-xx13M 2.5 --- 133 TES 2-xx22M ±1.5 --- ±83 TES 2-xx23M ±1 --- ±66 All mA 0.5 Second Max. Input Specification Parameter Operating Input Voltage Input Current (Maximum value at Vin= Vin nom;Full Load) http://www.tracopower.
PAGE 5
Application Note TES 2M Series Input Specification (Continued) Parameter Input Standby current (Typical value at Vin = Vin nom; No Load) Model Min Nominal TES 2-0511M --- --- TES 2-0512M --- --- TES 2-0513M --- TES 2-0522M --- --- TES 2-0523M --- --- 90 Max --- TES 2-1211M --- --- TES 2-1212M --- --- TES 2-1213M --- TES 2-1222M --- --- TES 2-1223M --- --- TES 2-2411M --- --- TES 2-2412M --- --- TES 2-2413M --- TES 2-2422M --- --- TES 2-2423M --- --- Mod
PAGE 6
Application Note TES 2M Series Characteristic Curves All test conditions are at 25℃ The figures are identical for TES 2-0511M 85 90 80 Efficiency(%) Efficiency(%) 80 70 60 50 4.5V 40 75 70 5V 5.5V 30 20 40 60 80 100 % of Full Load 65 4.5 5.0 5.5 Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Typical Output Ripple and Noise.
PAGE 7
Application Note TES 2M Series Characteristic Curves All test conditions are at 25℃ The figures are identical for TES 2-0512M 85 90 80 Efficiency(%) Efficiency(%) 80 70 60 50 4.5V 40 75 70 5V 5.5V 30 20 40 60 80 100 % of Full Load 65 4.5 5.1 5.5 Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Typical Output Ripple and Noise.
PAGE 8
Application Note TES 2M Series Characteristic Curves All test conditions are at 25℃ The figures are identical for TES 2-0513M 85 90 80 Efficiency(%) Efficiency(%) 80 70 60 50 4.5V 40 75 70 5V 5.5V 30 20 40 60 80 100 % of Full Load 65 4.5 5.0 5.5 Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Typical Output Ripple and Noise.
PAGE 9
Application Note TES 2M Series Characteristic Curves All test conditions are at 25℃ The figures are identical for TES 2-0521M 85 90 80 Efficiency(%) Efficiency(%) 80 70 60 50 4.5V 40 75 70 5V 5.5V 30 20 40 60 80 100 % of Full Load 65 4.5 5.0 5.5 Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Typical Output Ripple and Noise.
PAGE 10
Application Note TES 2M Series Characteristic Curves All test conditions are at 25℃ The figures are identical for TES 2-0523M 85 90 80 Efficiency(%) Efficiency(%) 80 70 60 50 4.5V 40 75 70 5V 5.5V 30 20 40 60 80 100 % of Full Load 65 4.5 5.0 5.5 Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Typical Output Ripple and Noise.
PAGE 11
Application Note TES 2M Series Characteristic Curves All test conditions are at 25℃ The figures are identical for TES 2-1211M 85 90 80 Efficiency(%) Efficiency(%) 80 70 60 50 10.8V 40 75 70 12V 13.2V 30 20 40 60 80 100 % of Full Load 65 10.8 12.0 13.2 Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Typical Output Ripple and Noise.
PAGE 12
Application Note TES 2M Series Characteristic Curves All test conditions are at 25℃ The figures are identical for TES 2-1212M 85 90 80 Efficiency(%) Efficiency(%) 80 70 60 50 10.8V 40 75 70 12V 13.2V 30 20 40 60 80 100 % of Full Load 65 10.8 12.0 13.2 Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Typical Output Ripple and Noise.
PAGE 13
Application Note TES 2M Series Characteristic Curves All test conditions are at 25℃ The figures are identical for TES 2-1213M 85 90 80 Efficiency(%) Efficiency(%) 80 70 60 50 10.8V 40 75 70 12V 13.8V 30 20 40 60 80 100 % of Full Load 65 10.8 12.0 13.2 Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Typical Output Ripple and Noise.
PAGE 14
Application Note TES 2M Series Characteristic Curves All test conditions are at 25℃ The figures are identical for TES 2-1222M 85 90 80 Efficiency(%) Efficiency(%) 80 70 60 50 10.8V 40 75 70 12V 13.2V 30 20 40 60 80 100 % of Full Load 65 10.8 12.0 13.2 Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Typical Output Ripple and Noise.
PAGE 15
Application Note TES 2M Series Characteristic Curves All test conditions are at 25℃ The figures are identical for TES 2-1223M 85 90 80 Efficiency(%) Efficiency(%) 80 70 60 50 10.8V 40 75 70 12V 13.2V 30 20 40 60 80 100 % of Full Load 65 10.8 12.0 13.2 Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Typical Output Ripple and Noise.
PAGE 16
Application Note TES 2M Series Characteristic Curves All test conditions are at 25℃ The figures are identical for TES 2-2411M 85 90 80 Efficiency(%) Efficiency(%) 80 70 60 50 21.6V 40 75 70 24V 26.4V 30 20 40 60 80 100 % of Full Load 65 21.6 24.0 26.4 Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Typical Output Ripple and Noise.
PAGE 17
Application Note TES 2M Series Characteristic Curves All test conditions are at 25℃ The figures are identical for TES 2-2412M 85 90 80 Efficiency(%) Efficiency(%) 80 70 60 50 21.6V 40 75 70 24V 26.4V 30 20 40 60 80 100 % of Full Load 65 21.6 24.0 26.4 Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Typical Output Ripple and Noise.
PAGE 18
Application Note TES 2M Series Characteristic Curves All test conditions are at 25℃ The figures are identical for TES 2-2413M 85 90 80 Efficiency(%) Efficiency(%) 80 70 60 50 21.6V 40 75 70 24V 26.4V 30 20 40 60 80 100 % of Full Load 65 21.6 24.0 26.4 Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Typical Output Ripple and Noise.
PAGE 19
Application Note TES 2M Series Characteristic Curves All test conditions are at 25℃ The figures are identical for TES 2-2422M 85 90 80 Efficiency(%) Efficiency(%) 80 70 60 50 21.6V 40 75 70 24V 26.4V 30 20 40 60 80 100 % of Full Load 65 21.6 24.0 26.4 Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Typical Output Ripple and Noise.
PAGE 20
Application Note TES 2M Series Characteristic Curves All test conditions are at 25℃ The figures are identical for TES 2-2423M 85 90 80 Efficiency(%) Efficiency(%) 80 70 60 50 21.6V 40 75 70 24V 26.4V 30 10 20 30 40 50 60 70 80 90 100 % of Full Load 65 21.6 24.0 26.4 Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Typical Output Ripple and Noise.
PAGE 21
Application Note TES 2M Series Testing Configurations Peak-to-peak output ripple & noise measurement test up +Vin +Vin +Out Single Output DC / DC Converter -Vin Copper Strip Cout -Out Scope +Out Copper Strip Cout Dual Output Com.
PAGE 22
Application Note TES 2M Series EMC considerations +Vin L2 L1 +Vin +Vout +Vout +Vin L1 L2 +Vin +Vout +Vout Rload C1 Rload C2 C1 COM C2 Rload -Vout -Vin -Vin -Vout - Vin -Vin -Vout -Vout Single Output Dual Output Recommended circuit to comply EN55022 Class A Limits Recommended PCB Layout with Input Filter To: comply with EN55022 CLASS A following components are needed: Model TES 2-05xxM TES 2-12xxM TES 2-24xxM Component Value C2 4.7μF/16V 1206 MLCC L2 4.7μH SCD0403T /1.
PAGE 23
Application Note TES 2M Series Mechanical Dimensions 24.0 [0.94] 15.24 [0.6] 2.54 [0.1] 10 9 1 7 8 13.7 [0.54] 16 18.1 [0.71] 3.11 [0.12] 9.0 [0.35] 1.00 [0.04] 0~ 4 9.25 0.5 [0.36 0.02] 0.25 [0.01] S SEATING PLANE 0.15 S Weight:3.75g Pin Connections Pin 1 7 8 9 10 16 Single Output -Vin NC NC +Vout -Vout +Vin http://www.tracopower.com Dual Output -Vin NC Common +Vout -Vout +Vin 1. All dimensions in mm (inches) Tolerance: X.X±0.25 (X.XX±0.01”) X.XX±0.13 (X.XXX±0.005”) 2. Pins ±0.
PAGE 24
Application Note TES 2M Series Recommended Pad Layout for Single & Dual Output Converter 17.78 [0.70] 15.24 [0.60] 2.54 [0.10] 19.3 [0.76] 2.8 [0.11] 1.6 [0.06] 1.All dimensions in mm (Inches) Tolerance: x.x±0.25mm (x.xx±0.01”) x.xx±0.13mm (x.xxx±0.005”) 2. Pin pitch tolerance: ±0.25mm (±0.01”) Packaging Information http://www.tracopower.
PAGE 25
Application Note TES 2M Series Soldering and Reflow Considerations Lead free wave solder profile for TES 2M Series http://www.tracopower.
PAGE 26
Application Note TES 2M Series Part Number Structure TES 2-0513M Max. Output Power 2W Input Voltage 05: 5V 12: 12V 24: 24V Output Mode 1: Single 2: Dual (±) Output Voltage 1: 5V 2: 12V 3: 15V Feature M: Medical Model Number Input Range (VDC) Output Voltage (VDC) Max.
PAGE 27
Application Note TES 2M Series Safety and Installation Instruction Fusing Consideration Caution: This power module is not internally fused. An input line fuse must always be used. This encapsulated power module can be used in a wide variety of applications, ranging from simple stand-alone operation to an integrated part of sophisticated power architecture. To maximum flexibility, internal fusing is not included; however, to achieve maximum safety and system protection, always use an input line fuse.