Datasheet

Testing Setup
TES 1 Series
Specifications can be changed without notice!
Make sure you are using the latest documentation, downloadable at www.tracopower.com
Application note: TES1-testing-setup,
page 1 of 1, rev.: 2. May 2016
Input reflected-ripple current measurement test setup
Peak-to-peak output ripple & noise measurement test setup
Output voltage and efficiency measurements test setup
BATTERY
V
+Vin
-Vin
V
-Vo
+Vo
Load
CONTACT AND DISTRIBUTION LOSSES
CONTACT AND DISTRIBUTION LOSSES
+Out
-Out
+Vin
-Vin
Dual Output
DC / DC
Converter
Resistive
Load
Scope
Copper Strip
Cout
Com.
Scope
Cout
Copper Strip
Copper Strip
+Out
-Out
+Vin
-Vin
Single Output
DC / DC
Converter
Resistive
Load
Scope
Copper Strip
Cout
Copper Strip
Component Component Value
L 4.7 µH —
C 220 µH (ESR <1.0 Ohm at 100 kHz) Aluminium Electrolytic Capacitor