Datasheet

Solder Pad Layout
TES 1 Series
Specifications can be changed without notice!
Make sure you are using the latest documentation, downloadable at www.tracopower.com
Application note: TES1-pad-layout,
page 1 of 1, rev.: 2. May 2016
All dimensions in mm (inches)
Toleracne: x.x ±0.5mm (x.xx ±0.02“)
x.xx ±0.25mm (x.xxx ±0.01“)
Pin pitch tolerance: ±0.25mm (±0.01“)
Pin dimension tolerance: ±0.1mm (±0.004“)
10.6 [0.42]
7.62 [0.30]
1.7 [0.07]
2.54 [0.10] 1.0 [0.04]
10.6 [0.42]
7.62 [0.30]
1.7 [0.07]
2.54 [0.10] 1.0 [0.04]
Dual outputSingle output
Suggested Solder Pad Layout