Datasheet

Outline Dimensions
TEQ 100WIR Series, 100 Watt
87.6 (3.45)
88.9 (3.50) 76.2 (3.00) 79.1 (3.114)
103.2 (4.06)
1
2
3
4
5
6
7
8
9
10
11
12
74.2 (2.92)
3.2 (0.13)
Screw 4–M3X0.5
Output voltage adjust
TOP VIEW
Output ON LED
Dimensions in mm, (inch)
Tolerances: x.xx ±0.5 (±0.02)
Terminal connection
Terminal Pin Function Recommended Wire
1,2
–Vin 12 AWG
3
NC NC
4
On/Off Ctrl 14 - 18 AWG
5, 6
+Vin 12 AWG
7, 8
–Vout 12 AWG
9
–Sense* 14 - 18 AWG
10
+Sense* 14 - 18 AWG
11, 12
+Vout 12 AWG
NC: No Connection
* Sense line to be connected to the output either at
the module or at the load under regard of polarity.
• The current rating of the terminal block is 15 A/pole.
• Using 2 poles in parallel if the peak output current
can exceed 15 A.
• Wire size shall be selected to withstand the peak out-
put current (Iout max + Current limitation).
© Copyright 2019 Traco Electronic AG Specifications can be changed without notice.
www.tracopower.com
Rev. August 5, 2019
Page 4 / 4