Datasheet

Options
TEP-HS1
- Heat-sink for standard version (incl. thermal pad and 2 clamps)
on demand
(backorder with MOQ
non stocking item)
- Optional model with 3.3 VDC / 50'000 mA Output and 9 - 36 VDC Input
- Optional model with 5 VDC / 36'000 mA Output and 9 - 36 VDC Input
- Optional model with 3.3 VDC / 50'000 mA Output and 18 - 75 VDC Input
- Optional model with 5 VDC / 40'000 mA Output and 18 - 75 VDC Input
- Optional model with 53 VDC Output and 33 - 75 VDC Input (2:1)
- Optional model with 3.3 VDC / 57'000 mA Output and 43 - 160 VDC Input
- Optional model with 5 VDC / 44'000 mA Output and 43 - 160 VDC Input
- 2:1 Input models
- Negative (passive = Off) Remote On/Off function
- Sync pin to synchronize switching frequency of up to 3 units (EMC reason)
Input Current
- At no load
24 Vin models:
35 mA typ.
48 Vin models:
20 mA typ.
110 Vin models:
10 mA typ.
Surge Voltage
24 Vin models:
50 VDC max. (1 s max.)
48 Vin models:
100 VDC max. (1 s max.)
110 Vin models:
185 VDC max. (1 s max.)
Under Voltage Lockout
24 Vin models:
7.3 VDC min. / 7.7 VDC typ. / 8.1 VDC max.
48 Vin models:
15.5 VDC min. / 16 VDC typ. / 16.3 VDC max.
110 Vin models:
33 VDC min. / 34.5 VDC typ. / 36 VDC max.
Recommended Input Fuse
24 Vin models:
32'000 mA (fast acting)
48 Vin models:
20'000 mA (fast acting)
110 Vin models:
10'000 mA (fast acting)
Input Filter
Internal Pi-Type
Input Specifications
Output Voltage Adjustment
–20% to +10% (By external trim resistor)
See application note:
www.tracopower.com/overview/tep200wir
Output power must not exceed rated power!
Voltage Set Accuracy
±1% max.
Regulation
- Input Variation (Vmin - Vmax)
0.1% max.
- Load Variation (0 - 100%)
0.1% max.
Ripple and Noise
(20 MHz Bandwidth)
3.3 Vout models:
75 mVp-p max. (with 1 µF X7R & 25 µF poscap)
5 Vout models:
75 mVp-p max. (with 1 µF X7R & 25 µF poscap)
12 Vout models:
100 mVp-p max. (with 1 µF X7R & 25 µF poscap)
15 Vout models:
100 mVp-p max. (with 1 µF X7R & 25 µF poscap)
24 Vout models:
200 mVp-p max. (with 4.7 µF X7R)
28 Vout models:
200 mVp-p max. (with 4.7 µF X7R)
48 Vout models:
300 mVp-p max. (with 2.2 µF X7R)
Output Specifications
TEP 200WIR Series, 200 Watt
All specifications valid at nominal voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
September 17, 2019
Page 2 / 5