Datasheet

ManualsBrandsTraco Power ManualsBoard Mounted DC / DC ConvertersDC/DC Converter 10W 12V 416mA

www.tracopower.com Page 1 of 4

DC/DC Converter TEL 10 Series, 10 Watt

Models

The TEL 10 series is a range of isolated 10 Watt DC/DC converters which come in a ultra

compact DIP-16 metal package. The design purpose of these series was to miniaturized

low power DC/DC converters to the maximum without sacriﬁcing high efﬁciency. The TEL

10 series sets the new standart for power density with 3.83 W/cm

The TEL 10 series offers a wide 2:1 input voltage range and features a high efﬁciency of

up to 88% which enables an operation temperature of up to +70°C at full load and up to

85°C with 50% load.

The converters have an internal input ﬁlter to comply with conducted emission EN 55032

class A. The TEL 10 Series models feature an overall economical solution for space critical

and cost sensitive applications in instrumentation, IT and industrial electronics.

Order code Input voltage Output voltage Output current max. Efﬁciency typ.

TEL 10-1210

9 - 18 VDC

(nominal 12 VDC)

3.3 VDC 2700 mA 79 %

TEL 10-1211

5.1 VDC 2000 mA 82 %

TEL 10-1212

12 VDC 833 mA 86 %

TEL 10-1213

15 VDC 666 mA 87 %

TEL 10-1215

24 VDC 416 mA 87 %

TEL 10-1222

±12 VDC ±416 mA 86 %

TEL 10-1223

±15 VDC ±333 mA 86 %

TEL 10-2410

18 - 36 VDC

(nominal 24 VDC)

3.3 VDC 2700 mA 80 %

TEL 10-2411

5.1 VDC 2000 mA 83 %

TEL 10-2412

12 VDC 833 mA 87 %

TEL 10-2413

15 VDC 666 mA 88 %

TEL 10-2415

24 VDC 416 mA 88 %

TEL 10-2422

±12 VDC ±416 mA 87 %

TEL 10-2423

±15 VDC ±333 mA 87 %

TEL 10-4810

36 - 75 VDC

(nominal 48 VDC)

3.3 VDC 2700 mA 80 %

TEL 10-4811

5.1 VDC 2000 mA 83 %

TEL 10-4812

12 VDC 833 mA 87 %

TEL 10-4813

15 VDC 666 mA 88 %

TEL 10-4815

24 VDC 416 mA 88 %

TEL 10-4822

±12 VDC ±416 mA 87 %

TEL 10-4823

±15 VDC ±333 mA 87 %

Models

• Most compact 10 Watt converter in

DIP-16 metal casing

• Highest power density of 3.83 W/cm

• 6-side shielded metal case with

insulated base plate

• Wide 2:1 input voltage range

• High efﬁciency for low thermal loss

• Operating temperature range of

-40°C to +85°C

• Built-in EN 55032 class A ﬁlter

• Current limitation and protection

against short circuit

• 3 years product warranty

UL 62368-1

UL 60950 -1

Summary of content (4 pages)

PAGE 1
DC/DC Converter TEL 10 Series, 10 Watt • Most compact 10 Watt converter in DIP-16 metal casing • Highest power density of 3.
PAGE 2
TEL 10 Series, 10 Watt Input Specifications Input current at no load 12 Vin models: 20 mA typ. 24 Vin models: 10 mA typ. 48 Vin models: 8 mA typ. Surge voltage (1 s max.) 12 Vin models: 25 V max. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Start up voltage 12 Vin models: 9 V (or lower) 24 Vin models: 18 V (or lower) 48 Vin models: 36 V (or lower) Under voltage shut down 12 Vin models: 8 V typ. / 7 V min. 24 Vin models: 16 V typ. / 15 V min.
PAGE 3
TEL 10 Series, 10 Watt General Specifications Temperature ranges – Ambient temperature 3.3 & 5.1 Vout models: –40°C to +78°C other output models: –40°C to +85°C – Case temperature +105°C max. – Storage temperature –55°C to +125°C Derating see application note www.tracopower.com/overview/tel10 Humidity (non condensing) 95 % rel H max.
PAGE 4
TEL 10 Series, 10 Watt Outline Dimensions bottom view 16 3.0 (0.12) 10 15.24 (0.60) 9 2.54 (0.1) Pin Single Dual 1 –Vin (GND) –Vin (GND) 7 NC NC 8 NC Common 9 +Vout +Vout 10 –Vout –Vout 16 +Vin (Vcc) +Vin (Vcc) NC: not connected Dimensions in mm, () = Inch Tolerances: x.x ±0.5 (±0.02) x.xx ±0.25 (±0.01) Pin diameter 0.5 ±0.05 (0.02 ±0.002) 3.8 (0.15) 8.0 (0.31) 23.8 (0.94) 13.7 (0.54) 10.16 (0.40) 7 1.77 (0.07) 1 Pin-Out 8 ø 0.5 (0.