Datasheet

TEL 10 Series, 10 Watt
www.tracopower.com Page 3 of 4
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
General Specifications
Temperature ranges – Ambient temperature 3.3 & 5.1 Vout models: –40°C to +78°C
other output models: –40°C to +85°C
– Case temperature +105°C max.
– Storage temperature –55°C to +125°C
Derating see application note
www.tracopower.com/overview/tel10
Humidity (non condensing) 95 % rel H max.
Isolation voltage – Input to output (60 s) 1‘500 VDC
– Input to output (1 s) 1‘800 VDC
– Input/output to case 1‘000 VDC
Isolation resistance (input to output, at 500 VDC) 1 GOhm min.
Isolation capacitance (input to output, at 1 VAC / 100 kHz) 1500 pF max.
Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign) TBD
Switching frequency 357 – 483 kHz. / 420 kHz typ. (PWM)
Safety standards /approvals IEC/EN/UL 62368-1 (Pending)
– Certification documents www.tracopower.com/overview/tel10
Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf
– RoHS RoHS directive 2011/65/EU
Physical Specifications
Casing material Aluminium alloy, black anodized coating
Potting material Epoxy (UL 94V-0 rated)
Pin material Tinned copper
Package weight 6.5 g (0.23oz)
Soldering profile 260°C / 10 s max.
Supporting Documents: www.tracopower.com/overview/tel10