Datasheet

www.tracopower.com Page 3 of 4
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
DC/DC Converters
TDR 2 Series 2 Watt
General Specifications
Temperature ranges – Operating –40°C to +85°C (with no derating)
– Storage –55°C to +125°C
– Case temperature +100°C max.
Humidity (non condensing) 5 – 95 % rel. H max.
Thermal shock acc. MIL-STD-810F
Vibration acc. MIL-STD-810F
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >7.1 Mio h
Isolation voltage (60 s) – Input/Output 1600 VDC
Isolation capacitance – Input/Output 50 pF max.
Isolation resistance – Input/Output (500 VDC) >1 GOhm
Safety approvals – UL/cUL 60950-1 www.ul.com -> certifications -> File: e188913
– Certification documents www.tracopower.com/overview/tdr2
Switching frequency 0.1 to 1.3 MHz
Remote On/Off – On: open or high impedance
– Off: 2...4 mA current applied via 1kOhm resistor
– Off stand by input current 2.5 mA max.
Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf
– RoHS RoHS directive 2011/65/EU
Pysical Specifications
Casing material non-conductive plastic (UL94V-0 rated)
Package weight 4.5 g ( 0.16 oz)
Soldering profile (for DIP models) 265°C / 10 s max. (wave soldering)
Lead-free reflow solder process (for SMD models) J-STD-020D
Moisture sensivity level (for SMD models) J-STD-033C level 2a
Packaging – Tube 10 pcs packing unit
– Tape & Reel (only SMD models, add suffix –TR) 200 pcs packing unit