USER MANUAL EZRUN Series Brushless Speed Controller EZRUN-80A EZRUN-150A
User Manual of eZRun-80A and eZRun-150A Brushless ESC Doc Ver: HW-13-80-OEM-081220.1 Page -1- Declaration Thanks for purchasing our Electronic Speed Controller (ESC). High power system for RC model can be very dangerous, so we strongly suggest you read this manual carefully. In that we have no control over the correct use, installation, application, or maintenance of our products, no liability shall be assumed nor accepted for any damages, losses or costs resulting from the use of the product.
User Manual of eZRun-80A and eZRun-150A Brushless ESC Doc Ver: HW-13-80-OEM-081220.1 Page -2- Note3: There is a small female connector that coming out from the “FAN” socket, this is used for connecting with the cooling fan of the brushless motor.
User Manual of eZRun-80A and eZRun-150A Brushless ESC Doc Ver: HW-13-80-OEM-081220.1 Page -3- 3. Check the LED Status in Normal Running Ì Normally, if the throttle stick is in the neutral range, neither the red LED nor the green LED lights. Ì The red LED lights when the car is running forward or backward and it will flash quickly when the car is braking. Ì The green LED lights when the throttle stick is moved to the top point (end point) of the forward zone or backward zone. 4.
User Manual of eZRun-80A and eZRun-150A Brushless ESC Doc Ver: HW-13-80-OEM-081220.1 Page -4- Program The ESC 1. Program Method Note5: Ì In the program process, the motor will emit “Beep” tone at the same time when the LED is flashing. Ì If the “N” is bigger than the number “5”, we use a long time flash and long “Beep---” tone to represent “5”, so it is easy to identify the items of the big number.
User Manual of eZRun-80A and eZRun-150A Brushless ESC Doc Ver: HW-13-80-OEM-081220.1 Page -5- 9 (The italics texts in the above form are the default settings) Programmable Items List Progra mmable Ite ms Programmable Value 3 4 5 1 2 Fo rward Only with Brake Forward/Rev erse with Brake Forward and Re verse 0% 5% 10% 20% 6 7 8 40% 60% 80% 100% 3.2V /Ce ll 3.4V /Cell Basic Items 1. Running Mode 2.Drag Brake Force 3.Low Voltage Cut-Off Threshold Non-Protection 2.6V/Cell 2.
User Manual of eZRun-80A and eZRun-150A Brushless ESC Doc Ver: HW-13-80-OEM-081220.1 Page -6- motor is trembling), it may caused by the weak discharge ability of the battery pack, please choose a better battery or increase the gear rate. 2.5. Maximum Brake Force: The ESC provides proportional brake function. The brake force is related to the position of the throttle stick. Maximum brake force refers to the force when the throttle stick is located at the top point of the backward zone.
User Manual of eZRun-80A and eZRun-150A Brushless ESC Doc Ver: HW-13-80-OEM-081220.1 Page Main Applications ESC Motor EZRUN-80A EZRUN-3665SL KV＝2300 EZRUN-80A EZRUN-3674SL KV＝2350 Pinion Applications M1, 13T 1/8 Off-Road: 9.5-16 1/8 Monster: 16-21 1/8 EP Off-Road Truggy or Buggy. 1/8 NP Off-Road Truggy or Buggy changes to EP. 3 cells or 4 cells Lipo battery is recommended. 32Pitch, 19T 1/8 Off-Road: 10-15.5 1/8 Monster: 13-21 1/8 EP Monster. Normal powerful.
