User Manual

ABD S -997H T G + H V / F u l l S i z e H i g h V o l t a g e BL D C S e r v o + H S + T G ( U l t r a H i g h
S p e e d )
Control System Positive PWM control 1500 usec Neutral
Operation Voltage Range 6.0V ~ 7.4V
Operation Temperature Range -20C° ~ +60C° (-4°F ~ 140°F)
Test Voltage: At 6.0V At 7.4V
Stall Torque 10.1kg/cm , 129oz/in 11.5kg/cm , 149oz/in
Standing Torque 10.6kg/cm , 147oz/in 13.1kg/cm , 176oz/in
Speed 0.09sec / 60 deg at no load 0.07sec / 60 deg at no load
Idle Current 2mA at stopped 2mA at stopped
Running Current 330mA at no load 345mA at no load
Stall Current 920mA 1050mA
Dead band width 2 usec 2 usec
Operation Travel 40°/ one side pulse travel 400 usec
Direction Re-clock wise/ Pulse Travel 1500 to 2000 usec
Motor Type Japan Brushless motor
Potentiometer Type 4 Slider/indirect drive
Amplifier Type 6A Treble Power MOS-FET
Dimensions 39.0 x 19 x 38.5 mm / 1.56 x 0.74 x 1.54 in.
Weight: 56grams / 1.66oz without splined horn
Ball Bearing Dual / M10x6
Gear Material Titanium Gears
Horn Gear Spline Metal 25 Tooth (External diameter: 5.9mm)
Connector Wire Length 300mm (9.85inch)
Connector Wire Stand Counter 60EA
Connector Wire Gauge 22AWG
Wire Info (Black) - Negative
Wire Info (Red) + Positive
Wire Info (White) S Single
Spare Parts Items
Servo Gear Set <#10706> ABDS-997HTG+HV(Metal Gears)
Servo Case Set <#10707> ABDS-997HTG+HV(Outside case)
Servo Accessories
<#10708> ABDS-997HTG+HV(Accessories - Horn & screws & rubber )