Parts List

The fence will appear on the map as a rectangle at the center, and you can change its
size and position by grabbing its corners with the mouse and dragging them where you
want. You can also set the center of the fence by entering an address in the address-
search area. Then you give your fence a name and save it. After you save the fence,
every time the device crosses the fence's boundaries, you will receive an alert. You
can add more contacts who will receive the alert too by email or SMS.
Important to know about fences: the GPS sensor sometimes receives signal
interference, which cause it to shift momentarily for several meters, and it quickly
corrects the location. However, if the fence boundary is too close to the device's usual
location, the interference might cause to momentarily appear as if it crossed the fence,
and create a false alarm. So if you set the fence exactly at the location of your back
yard, and your dog hangs around near the yard's edge, you might get a false fence
alert. So we recommend setting the fence to no less than 200 meters (about 200 yards)
on each side, and in any case keep a bit of space between your yard's boundary and the
virtual fence.