Full Product Manual

Shelf Installation

Step 1: Determine the desired height of the shelf.

Step 2: Insert the top of the clip into the desired notch then push

the bottom into the notch below the top notch.

Step 3: Repeat Step 2 for all 4 clips required for each shelf. Make

sure they are all aligned with one another.

Attention: Remove clips by pulling up on the bottom part of the clip.

Step 4: Move the shelf into the

safe angled diagonally (le side

lower then the right side) and

move it above the clips before

leveling the shelf. Bring the shelf

down onto the clips slowly.

Caution: Do not exceed 25

pounds on a single shelf.

Overloading shelves can cause

shelves or clips to break.