Full Product Manual
Anchoring your Safe to the Floor
WARNING:
Safe must be bolted to the oor.
e safe presents a safety hazard (tipping) unless bolted down.
It is highly recommend to anchor your safe to the oor. is both
maximizes your protection from burglary/the but also prevents the safe
from tipping over.
Please see our website TrackerSafe.com for instructions on how to anchor
your safe. Due to various types of ooring materials and methods, you
may need to purchase dierent anchors.
Tracker Safe assumes no liabilty for any damages that may occur during
this anchoring process.
8
Removing Your Safe From The Pallet
WARNING:
Do not attempt this by yourself.
is process requires two or more adults.
Please see our website, TrackerSafe.com, for more details on how to
remove the safe from the pallet.
1) Cut the banding straps and remove the packaging.
2) Slide the safe sideways until about half of the safe is hanging over the
edge of the pallet. We recommend to have at least one adult on each side of
the safe.
3) Gently and slowly tilt the safe until the bottom of the safe touches the
ground.
4) Continue to tilt the safe in the same direction liing the safe o of the
pallet. While the safe is tilted o of the pallet, remove the pallet from
under the safe.
5) Gently and slowly lower the safe to the ground.