Full Product Manual

Electronic Lock Continued

Replacing the Battery:

TYPE 2: SLIDE UP BATTERY COMPARTMENT:

1) Slide the entire keypad up;

parrallel with the door of the safe.

You will feel it “pop” loose.

2) Carfully pull the keypad away

from the safe and take care of

the wires.

3) Carefully disconnect the 9-volt battery from the terminals by

unsnapping the terminal connector located on top of the battery.

CAUTION: DO NOT PULL BATTERY LEADS/WIRES OUT

OF THE HOUSING!

4) Press and hold each number on the keypad for 5 seconds each.

5) Connect a new 9-volt alkaline battery with a “use date” of at

least 5 years in the future.

6) Push the battery and the wire leads completely into the

compartment.

CAUTION: BE VERY CAREFULL NOT TO PINCH THE

BATTERY LEADS.

7) Carefully position the keypad over the two mounting screws and

slide the keypad down until you feel a “pop”.

CAUTION: BE CAREFUL NOT TO PINCH THE WIRES.