Full Product Manual
Opening your safe for the rst time
5
WARNING:
Always perform code change with the door OPEN and the bolts
extended in the locked position.
1) With the door in the open position, enter “zero”(0) six(6) times.
2) Within four (4) seconds, enter the existing six (6) digit code ONE (1)
time.
3) Within four (4) seconds, enter the NEW six (6) digit code TWO(2)
times.
4) Test your new code several times before closing and locking the door.
Valid Code Entry: Two (2) Beeps at the same time as two (2) LED
ashes aer valid six(6) digit code is entered.
Invalid Code Entry: ree (3) Beeps at the same time as three (3) LED
ashes and the old code is still valid.
If a mistake is made while programming the new code, wait thirty (30)
seconds and repeat steps 1-3.
Electronic Lock:
Programing your Electronic Lock:
1) Turn the handle counter-clockwise until it stops.
2) Enter the factory code 1-2-3-4-5-6.
3) e lock will conrm a vaild combination with two (2) beeps at the
same time as two (2) LED ashes.
4) Within four (4) seconds, turn the handle clockwise until the handle
stops.
5) Pull the door open.
Invalid Combination Entry will be conrmed by three (3) beeps at the
same time as three (3) LED ashes.