User manual

6
Specifications
Mains Voltage:
100-120 vac - 50/60Hz - T3.15AL/250V
230 vac - 50/60Hz - T1.6AL/250V
Power Consumption:
Typical = 30W
Maximum = 240W
SMPS:
ermal protection
Over-current protection
Power Amplier:
Protection:
Clip limiting
ermal
Over-current / Short-circuit
DC output
Minimum Load:
4 Ω
example--
1 - 4 Ω cabinet / 2 - 8 Ω cabinets
Power Output (1% THD):
130W - 8 Ω
200W - 4 Ω
Noise:
-62.5 dBu
Pre Amplier:
Nominal Input Sensitivity:
All controls @12:00 = -6.44dBu (369mV)
Input Impedance:
>10 meg Ω
EQ:
3 - band rotary type with proprietary TE lters
Low center = 80 Hz
Mid center = 400 Hz
High center = 4.2 KHz
DI XLR Balanced Output:
PIN 1 = GND, PIN 2 = sig+, PIN 3 = sig-
Post EQ
1 KΩ output impedance
w/GND li switch
noise oor = -104.3dBu
noise oor w/sig (nom.) = -88dBu
Weight:
1.6 lb (0.73 Kg)
Dimensions (H x W x D):
1.35” (3.4cm) x 6.75” (17.1cm) x 4.10” (10.4cm)