TracWatch TracWatch User Manual V1.
TracWatch 1. SYMBOLS 2. Install and login (1) Download "TracWatch" APP on phone and install. (2) Turn on the Bluetooth , switch on the "TracWatch" , and enter the APP home page. 3.
TracWatch connected”, click "Bluetooth Scan" to search for the device. (2) Bluetooth Connection Click Bluetooth name in the bluetooth list to start the connection.
TracWatch disconnect the APP from the device. 4. Measurement Wearing the watch correctly, view the measurement data in real time on APP, including date and time, alcohol value, voltage, and contact value.Data is updated every 30 minutes and a data is recorded.
TracWatch 5. Battery and Charging Battery：The device is powered by 3.7V 520mAh rechargeable Li-ion battery. Charging： (1) Mate the metal contacts of the device with the metal probe on the charging station and connect the USB connector to the power supply to charge the device. (2) During charging, the red light on charging station is on. (3) When charging finished, the yellow light is on.
TracWatch FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
TracWatch L'exploitation est soumise aux deux conditions suivantes : (1) Cet appareil ne doit pas provoquer d'interférences. (2) Cet appareil doit accepter toute interférence, y compris les interférences susceptibles de provoquer un fonctionnement indésirable de l'appareil. l'appareil numérique du ciem conforme canadien peut - 3 (b) / nmb - 3 (b). This device meets the exemption from the routine evaluation limits in section 2.
