User Manual

MN March22
www.tqbbrands.com.au Page 1 of 3
Evaporative Cooler
Pump Replacement
Maintenance Guide
Product Codes: 1027T, 1035T
Pump Replacement Maintenance Guide
1. Disconnect the Evaporative Cooler from the power source and drain the
water tank [item 15] by opening the drain valve [item 18].
2. Remove cooling pad fastening sheet [item 27] then remove
dust proof sheet [item 26] and cooling pad [item 25] by
removing the phillips head screws.
3. Disconnect from the water supply hose [item 20] from the pump.
4. Remove the pump retainer and lift the pump [item 28] from the base of the water
tank.
The usual fault symptoms related to a damaged or stalling pump impeller are as follows:
- Pump is not pumping water to the cooling pad.
-
Pump intermittently pumps water to the cooling pad.
DISCONNECT THE EVAPORATIVE COOLER FROM THE POWER
SOURCE PRIOR TO ANY MAINTENANCE PERFORMED

Summary of content (3 pages)