User Manual

EN – 9
7 Cleaning
— The components of the HPR50 drive system must only be cleaned with
water from a standard household water hose and not with any high-pres-
sure cleaner.
— Before cleaning switch off the drive system on the Display.
— Before Cleaning remove the optional Range Extender if necessary.
— Before cleaning the e-bike check that the cover of the charging port in the
bike frame is closed and engaged.
— After cleaning, check that the charging port in the e-bike frame is dry. If
there are drops of water on the contacts in the charging port, the e-bike
may not be able to be switched on.
8 Maintenance and Service
All service, repair or maintenance work performed by a TQ authorized
bicycle dealer. Your bicycle dealer can also help you with questions about
bicycle use, service, repair or maintenance.
9 Environmentally friendly disposal
The components of the drive system and the batteries must not be
disposed of in the residual waste garbage can.
— Dispose of metal and plastic components in accordance with-
country-specific regulations.
— Dispose of electrical components in accordance with country-specific
regulations. In EU countries, for example, observe the national imple-
mentations of the Waste Electrical and Electronic Equipment Directive
2012/19/EU (WEEE).
— Dispose of batteries and rechargeable batteries in accordance with the
country-specific regulations. In EU countries, for example, observe the
national implementations of the Waste Battery Directive 2006/66/EC in
conjunction with Directives 2008/68/EC and (EU) 2020/1833.
— Observe addtitonally the regulations and laws of your country for disposal.
In addition you can return components of the drive system that are no longer
required to a bicycle dealer authorized by TQ.