User's Manual

EN – 9
5 Setup-Mode
5.1 Setup-Mode activate
► Switch off the drive system.
► Press and hold the button on the
display (pos. 5 in Fig. 1) and the
DOWN button on the remote (pos.
2 in Fig. 2) for at least 5 seconds.
5.2 Settings
The following settings can be made in
the setup-mode:
Setting Default value Possible values
Measure metric (km) metric (km) or angloamerican (mi)
Acoustic
acknowledge
signal
ON (sounds with each
buttonpress)
ON, OFF
Walk assist ON ON, OFF
Tab. 3: Settings in Setup-Mode
► Use the buttons on the remote to scroll through the respective menu.
► Confirm the selection made with the button on the display. The next selec-
tion is then displayed or the setup mode is terminated.
► The display screen can be changed by pressing the remote button (> 3s)
if the walk assist function is deactivated due to country-specific laws and
regulations.
Fig. 4: Setup-Modus aktivieren
>5 s
>5 s
+