Installation Guide

Date : October 18th 2019
DM3G Low-band
Ref : Installation Guide
Edition 1.2.0
Page
27/27
such wastes, and so preserve, protect and improve the quality of the environment, and protect
human health.
This product has been designed and manufactured with materials and components of high
quality that can be reused or recycled. It is compliant with Directive 2011/65/EU on the
restriction of the use of certain hazardous substances in electrical and electronic equipment.
13 Technical Specifications
DM3G Low-band
Frequency bands 33-50 MHz
Functional modes direct / semi-duplex / duplex
Channel spacing 12.5 - 20 - 25 KHz
Channels number 1 000
RF output power 50 W
Analog modulation 16K0F3E
Frequency stability 5ppm
Noise < -40 dB
Spurious radiation < 0.25 µW
Analog data rate 1200 bds/s
TX/RX switch time 1 ms
20dB SINAD sensitivity -116 dBm typ.
Intermodulation rejection > 70 dB typical
RSSI dynamic range 72 dB
Intermediate frequencies 130.03 MHz - 30 KHz
Selectivity > 65 dB typical
Audio Audio output power
10 W / 8 
Digital modulation TDMA - 4GFSK
Digital data rate 9600 bds/s
Digital sensitivity (BER 10-3) -117dBm
Power supply voltage 13.6V nominal +/-15% (extremes conditions)
Power consumption (TX) < 12A
Power consumption (RX) < 300 mA
Width 175 mm
Depth 188 mm (with RJ45 and USB connectors)
Thickness 37 mm
Weight 1.4 Kg
Temperature range -20°C to +55°C
Dust- and Water-proofness IP54
PMR
RF transmitter
Dimensions
RF receiver
Power supply
e-DMR
Environment
Handset : MCE3G
Width 68 mm
Height 163 mm
Thickness 25 mm
Weight 233 g (with wired cable) ; 190g (BT wireless)