User's Manual

PRODUCT DESCRIPTION
The RC3-1FE model is a VHF broad band amplifier intended for use in mobile applications. This
amplifier can deliver 100W when driven with 25W and it will cover the frequency range form 136-174
MHz. The amplifier’s dimensions are: 6.73"L x 1.94"H x 6.0" W, including tabs (see figure 1) and the
weight is 2 lbs.
Figure 1. Package dimension for RC3-1FE amplifier
GENERAL SPECIFICATIONS
The general specifications for the RC3-1FE amplifier are shown in this section.
TABLE 1
OPERATION MODE: FM / CW
OPERATING VOLTAGE: Nominal DC operating voltage is 13.8VDC and the specifications are
given at this voltage. However, the minimum DC operating voltage is 11 Volts and the maximum DC
operating voltage is 15 Volts as measured at the VDC input connector. Reduced DC input voltage will
result in lower output power and efficiency.
EIA DUTY CYCLE: WITH NO EXTERNAL COOLING:
100 W Output (FM)  30% duty cycle
NOTE: Use of TPL Mobile Amplifiers above the recommended duty cycle or in repeater
applications is not recommended and voids the warranty.
Page 2
LEDOM
TUPNI
REWOP
TUPTUO
REWOP
LANIMON
TNERRUC
LANIMON
EGATLOV
ESUF
EF1-3CRW52W001A51CDV8.31A52