Product Manual

SERIES 5100
TASKMASTER
INSTALLATION INSTRUCTIONS
Dust Shield - Taskmaster Series
For Horizontal Air Delivery Units
Model DS5105 Use with 5102-5105 Units
Model DS5120 Use with 5107-5120 Units
Model DS5150 Use with 5125-5150 Units
1) Install the hanger base “A” on the heater following the instruction sheet packed with the
combination wall/ceiling bracket or the hanger base.
2) Attach the hanger bracket to the wall or ceiling as desired following instructions packed with
the bracket.
3) Following the correct illustration below:
Fig. A Wall Mounted Bracket
Fig. B Ceiling Mounted Bracket
Fig. C Customer Supplied Bracket or Direct Connection to Building Structural Member.
Position the dust shield as shown and insert the bolt of the hanger base “A” through the hole in
the dust shield, attach to the hanger bracket or structural member and attach the lock nut “E”
and complete installation as per the bracket installation sheet.
NOTE: The dust shield is to be positioned on the same axis as the heater.
"E"
"A"
"A"
"A"
Fig. A
Fig. B
Fig. C
FORM: 56621-101
ECO 1-5719