Product Manual

8.) Fig. 2 Mount low volt relay in wiring compartment. Slip long leg of relay base under raised section of control
mounting plate and attach diagonally opposite corner of relay base to control mounting plate with the No.
8 sheet metal screw supplied.
NOTE: Models 5102 thru 5105
Relay is mounted next to heater terminal block
Models 5107 thru 5150
Relay is mounted next to heater terminal board
9.) Wire relay according to wiring diagram located on inside of heater bottom panel. Attach relay leads 6, 8,
7 & 9 to terminals 6, 8, 7 & 9 on terminal board.
10.) After installation is complete, depress the reset button to insure continuity before applying power. After power
is available to unit, check for proper operation.
FORM: 56621-099
ECO 1-5719
2 - 5KW
FIG. 2
7 - 20KW
FIG. 2
25 - 50KW
FIG. 2