Product Manual

SERIES 5100

TASKMASTER

INSTALLATION INSTRUCTIONS

CEILING HANGER BRACKET TASKMASTER SERIES

VERTICAL DISCHARGE AIR DELIVERY

MODEL V5105USE WITH 5102-5105 UNITS

MODEL V5120USE WITH 5107-5120 UNITS

MODEL V5150USE WITH 5125-5175 UNITS

MODEL V5105 IS FOR USE WITH 5102 THRU 5105 HEATERS.

MINIMUM MOUNTING DISTANCES FOR 5102 THRU 5105 HEATERS:

12” FROM CEILING AND ADJACENT SURFACES

7’ FROM FLOOR TO FRONT EDGE OF HEATER FRONT VENTURI

MODEL V5120 IS FOR USE WITH 5107 THRU 5120 HEATERS

MODEL V5150 IS FOR USE WITH 5125 THRU 5175 HEATERS

MINIMUM MOUNTING DISTANCES FOR 5107 THRU 5175 HEATERS:

18” FROM CEILING

24” FROM ADJACENT SURFACES

7’ FROM FLOOR TO FRONT EDGE OF HEATER FRONT VENTURI

1) Attach short angle brackets “A” to back of heater with four 5/16-18 bolts “B”, lockwashers “F”.

Be sure vertical leg of angle brackets face top and bottom of heater.

2) Attach inverted U frames “D” to short angle brackets with four 5/16-18 bolts “E”, washers “F”, lockwashers

“G” and nuts “H”, oriented as shown.

3) Attach long angle brackets “J” to inverted U frames “D” with four 5/16-18 bolts “K”, washers “L”, lockwashers

“M” and nuts “N”.

4) Attach heater and bracket assembly to ceiling in desired location using customer supplied hardware

sufficient to support the assembly.

FORM: 56620-004

ECO 1-5719