Cut Sheet

34
Selectable Wattages, Back Cans, And Power Disconnects
Recess, Surface, Or
“T” Bar Mounting
Standard Models
Field Installed Accessories
Furnish and install Electric Forced Air Heaters, Series 3380 where specied.
The heaters shall be constructed of a heavy gauge steel housing. The rough-
in dimensions are 19-3/16” wide x 4” deep. The nish shall be baked-on
powder coat in Ceiling White color. The units shall be available in ratings
from 1500 through 4800 Watts with an optional factory installed single pole
thermostat.
The heaters shall have a low speed 600-RPM motor, which drives a vane
axial blower to deliver a quite 175 CFM’s of down ow air. The heating
element shall be of the block nned type with large, parallel steel ns for
quick heat transfer. Unit shall have as standard, a manual reset capillary
type limit control, for added safety. Unit weight 22 pounds.
Product Specications
Features & Standard Models
Accessories
3000 Series Fan Forced Ceiling Heater
3380 Series Commercial Fan Forced Ceiling Heater
• Wattage selectable at time of installation - models shipped wired to highest Wattage
• Fan purge circuit (requires 2 wire control circuit when remote wall thermostat
is used with the unit)
• Models may not be used with remote double pole thermostat
• Drywall depth embossments on back can
• Powder coated 18 Gauge steel front
• Manual reset thermal limit
• Steel block n element
• Propeller style fan blade - 1060 RPM / 100 CFM
• Weight 6 lbs.
• Optional eld installed control voltage relays available
• Rough in dimensions - 9 1/4” Wide - 12 1/8” High - 3 5/8” Deep
• Grill dimensions: 9 25/32” Wide - 13” High
• Fan purge circuit (requires 2 wire control circuit
when remote wall thermostat is used with the unit)
• Disconnect switch
• White powder coated 18 Gauge steel grill
• Manual reset thermal limit
• Steel block n element
• Vane axial fan blade:
1.5KW - 4.0KW units: 700 RPM motor; 175
CFM 4.8KW units: 900 RPM motor; 200
CFM
• Rough in dimensions:
14 3/16” wide x 19 5/16” high x 4” deep
• Grill dimensions:
15 3/8” wide x 20 9/64” high
• Optional factory installed tamper resistant
thermostat
Manufactured in U.S.A.
Manufactured in U.S.A.
WHITE
SELECTABLE
INSTALLATION WATTAGE
MAX
BTU'S
VOLTS
MAX
AMPS
LIST
UPC#
686334
MODEL
948821 E3035DWBW 750 or 1500 5120 120 13
254
948838 E3038DWBW 900 or 1800 6143 120 15
948883 H3032DWBW 750 or 1000 - 1500 or 2000 6826 208 / 240 8
948906 G3032DWBW 2000 6826 277 7
UPC#
686334
MODEL DESCRIPTION LIST
996846 30R 24 VOLT RELAY
35
996853 30R2 120 VOLT RELAY
951500 30R8 208/240 VOLT RELAY
37
951494 30R7 277 VOLT RELAY
996976 303EX8RW 1" EXTENDER 37
996969 303EX16RW 2" EXTENDER 38
996952 303EX32RW
4" SURFACE MOUNT FRAME 44
460033 TB3000 T-BAR FRAME 58
UPC#
686334
MODEL KW BTU’S VOLTS PH AMPS
TEMP
RISE
LIST
366489 E3383D-RP 1.5 5120 120
1
12.5 27 °F 589
366298 F3386D-RP 4.0 13600 208 19.2 72 °F 619
366304 F3387D-RP 4.8 16382 208 23.1 76 °F 697
366342 HF3384D-RP 2.0 / 1.5 6826/5120 240/208 8.3/7.2 36 °F 541
366359 HF3385D-RP 3.0 / 2.3 10200/7679 240/208 12.5/10.8 54 °F
617
366366 HF3386D-RP 4.0 / 3.0 13600/10200 240/208 16.8/14.4 72 °F
366373 H3387D-RP 4.8 16382 240 20 76 °F 696
366502 G3383D-RP 1.5 5120 277 5.4 27 °F 589
366410 G3384D-RP 2.0 6826 277 7.2 36 °F 617
366427 G3385D-RP 3.0 10200 277 10.8 54 °F
697
366434 G3386D-RP 4.0 13600 277 14.4 72 °F
366441 G3387D-RP 4.8 16382 277 17.3 76 °F 772
International Models
470889 M3384D-RPi 1680 5734
220 1
7.6 30 °F 589
470896 M3385D-RPi 2520 8600 11.5 50 °F 619
470902 M3386D-RPi 4032 13761 18.3 72 °F 697
UPC
686334
MODEL DESCRIPTION WT. LIST
377850 BOX3310 Additional Back Can 10 lbs 96
381109 3380EX33 Surface Mounting Adapter 1 lb 85
460026 TB3380 2X2 T-Bar Mounting Kit 7 lbs 57
Thermostat- Add sufx T to model
Factory installed single pole, positive off. Range-60° F-105° F
111