Product Manual

ISSUE DATE 10-09-03 REV. DATE 2-26-09 REV. LEVEL: 14 ECO 1-6073 OIPM P/N 8329 PG 7 OF 17
MINIMUM CLEARANCES TO COMBUSTIBLES
WARNING!
Heaters should be installed so that the minimum clearance to vehicles, as marked on the
heater, will be maintained. If vehicle lifts are present, ensure that the minimum clearance to
combustibles will be maintained from the highest raised vehicle.
•
Dimensions are listed in
inches
• Dimension “B” indicates
the required clearance to
combustibles; it DOES
NOT indicate the required
mounting height.
END VIEW – 0 DEGREE TILT
END VIEW – 0-45 DEGREE TILT
TOP VIEW
- 2 UNITS SHOWN
C”
6”
B”
6”
24”
FROM A
VERTICAL OR
COMBUSTIBLE
SURFACE
OR
36” FROM
ANOTHER
HEATER
B”
B”
B” Dimension
2-Lamp units:
-72” for a single unit
-72” for (2) or more
heaters being mounted
end-to-end.
3-Lamp units:
-72” for a single unit
-96” for (2) or more
heaters being mounted
end-to-end.
C” Dimension
TYP. BOTH SIDES AND
ENDS
24” FROM A VERTICAL OR
COMBUSTIBLE SURFACE
36” FROM ANOTHER
HEATER
C”
C”
Multiple Heaters may be butted
together on end surfaces
B”
EXPLOSION HAZARD
FIRE HAZARD
BURN HAZARD
• Serious injury or death may
occur.
• Do not use in locations containing
hazardous atmospheres.
• Do not touch a
ny part of heater
while in operation or directly
thereafter. It is very HOT.