Product Manual

EXPLOSION HAZARD
FIRE HAZARD
BURN HAZARD
• Serious injury or death may
occur.
• Not for indoor residential use.
• Do not use outdoors in wet
conditions and in unprotected
locations.
• Use for comfort heating only.
• Do not use in locations con-
taining hazardous or explosive
atmospheres.
ISSUE DATE 7/2015 REV. DATE- REV. LEVEL: - ECO 1-7092 OIPM P/N 8420 PG 3 OF 11
Thank you very much for selecting Fostoria’s portable electric infrared heating equipment for your
com fort heating needs. These products were engineered with the most reliable components and
mate rials available and are equipped with features to assure ease of installation and maintenance.
The warmth you will now enjoy when using this heating equipment is created by a heat source; a at
panel emitter; that emits infrared energy in the form of heat, like the sun. This is an economical way
to heat because it heats people and objects, not the air, so you don’t need to heat a large area to feel
warm.
CHECKING YOUR SHIPMENT
• Upon receipt of your shipment, check all cartons for visible damage.
• Claims for damaged material or shortages that were not evident upon receipt of shipment must be
reported to carrier and TPI Corporation’s customer service (800-251-0382) immediately.
• Any accessory items ordered for the heater will be shipped in separate cartons.
The Fostoria FSP-series is a line of heavy-duty por table
heaters designed to provide electric infra red heat when
permanently installed heaters are not practical or
eco nomical. They are easily transported to the work site
and connected to disconnect switch es or lighting centers.
The units are suited to a wide variety of indoor and
pro tected outdoor commercial or industrial uses. They
operate cleanly, emitting no fumes or odors.
Applications where combustible materials and/or
person nel will be located near these heaters require the
addition of a ground-fault sensing switch as part of the
electrical circuit. See the INSTALLATION PLANNING
section of this manual for more details. Any installation of
these heaters must also adhere to the minimum clearance
information below.
THANK YOU!!
GENERAL DESCRIPTION & USE
MODEL
REQUIRED CLEARANCES
TO COMBUSTIBLES FROM
FRONT OF HEATER
FSP-1412-1C 3 FEET
FSP-31 3 FEET
FSP-43 4 FEET
FSP-95 7 FEET