Item Brochure

21
2600 Series Downow Unit Heater
Standard Models
Product Specications
SPECIFICATIONS: The contractor shall furnish and install the 2600 Series electric vertical discharge
unit heaters of the size, capacity and voltage specied. Heaters shall be installed according to the
manufacturer’s recommendations and applicable national and local codes.
ELEMENTS: Elements shall consist of Nickel Chromium alloy resistance wire embedded and completely
surrounded in Magnesium Oxide, enclosed and swagged into corrosion resistant sheaths. Corrosion
resistant steel ns shall be permanently attached to the sheaths to provide maximum heat transfer to the
air stream.
MOTORS: Motors shall be single phase, resilient mounted, totally enclosed, industrial rated with an
automatic reset thermal overload protective device. Motors on heaters up to 20 KW capacity shall be
permanently lubricated shaded pole type. Over 20 KW, motors shall be permanent split capacitor type.
Motors shall be mounted out of the main air stream in such a manner as to allow ambient air to be drawn
over the motor to reduce motor temperature. Motor shall be separately removable from beneath the heater
without removing the entire heater from mounting bracket.
FAN BLADES: Fan blades shall be heavy-duty individually balanced axial ow type. Fan speed shall not
exceed 1570 RPM.
THERMAL OVERLOAD PROTECTION: All heaters shall be equipped with a manual reset thermal
cutout which disconnects elements and motor in the event normal operating temperatures are exceeded.
WIRING: Heaters shall be designed for a single supply circuit with elements, motor and control circuits
subdivided and fused to conform with the latest National Electric Code and OSHA requirements. All three
phase heaters shall have balanced phases.
CONTROLS: Heaters shall be controlled by a low voltage wall mounted thermostat. All heaters 25 KW
and larger shall be wired for 2 stage operation. 5 KW through 20 KW units are single stage. All heaters
shall be equipped with a fan safety device that causes fan to operate after elements are de-energized to
purge unit of residual heat.
**Disconnect not available
SEE NEXT PAGE FOR OPTIONS
*Double Eagle Promo Heater
DOUBLE EAGLE
FROM TPI!!!
SAVINGS
PROGRAM
DOUBLE EAGLE
SAVINGS PART 1:
A free SDHW1001 thermostat
will be shipped no charge with
each 5100/2600 heater with low
voltage control option - almost a
$400 list option!
DOUBLE EAGLE
SAVINGS PART 2:
Your Customer can save energy
every day by utilizing the 12
degree setback option on the
SDHW1001. You can also utilize
up to four stage control on
appropriate heater models - only
using the energy you need!
MFG
CATALOG
NUMBER
MFG
MODEL
NUMBER
KW BTUs VOLTS PH AMPS
CONTROL
VOLTS
TEMP
RISE
O
F
CFM
WT
(LBS)
LIST
07157502 F1F2605CA1*
5 17065
208
1
24.03
24 34 490 75
1346
07157602 H1H2605CA1* 240 20.83
07157702 G1G2605CA1* 277 18.05
07157802 F3F2605CA1* 208
3
13.89
07157902 H3H2605CA1* 240 12.04
07158002 P3P2605CA1* 480 6.02
1647
07158202 F1F2607CA1*
7.5 25598
208
1
36.05
24 45 560 75
1731
07158302 H1H2607CA1* 240 31.25
07158402 G1G2607CA1* 277 27.07
07158502 F3F2607CA1* 208
3
20.84
07158602 H3H2607CA1* 240 18.06
07158702 P3P2607CA1* 480 9.03
1902
07158902 F1F2610CA1*
10 34130
208
1
48.07
24 26 1200 75
2370
07159002 H1H2610CA1* 240 41.66
07159102 G1G2610CA1* 277 36.1
07159202 F3F2610CA1* 208
3
27.79
07159302 H3H2610CA1* 240 24.08
07159402 P3P2610CA1* 480 12.04
2796
07159602 F3F2615CA1*
15 51195
208 41.68
24 39 1200 75
2711
07159702 H3H2615CA1* 240 36.12
07159802 P3P2615CA1* 480 18.06
3051
07160002 H3H2620CA1* 19.4
68260
240 48.16
24 52 1200 75
3135
07160102 P3P2620CA1* 20 480 24.08
3689
07175102 F3F2625CA1*
25 85325
208 69.48
24
24 3300 175
4171
07175202 H3H2625CA1* 240 60.21
07175302 P3P2625CA1* 480 30.1
4257
07175502 F3F2630CA1**
30 102390
208 83.37
29 3300 175
4553
07175602 H3H2630CA1* 240 72.25
07175702 P3P2630CA1* 480 36.12
5108
07175902 F3F2640CA1**
40 136520
208 111.17
38 3300 175
6046
07176002 H3H2640CA1** 240 96.33
07176102 P3P2640CA1* 480 48.16
07176302 F3F2650CA1**
50 170650
208 138.96
48 3300 175
6897
07176402 H3H2650CA1** 240 120.42
07176502 P3P2650CA1* 480 60.21