USER’S GUIDE AIR CURTAINS Models: CF35-C, CF47-C, CF59-C Thanks for purchasing this Air Curtain. PLEASE READ AND SAVE THESE INSTRUCTIONS.
WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: A. Always disconnect, lock and tag power source before installing or servicing. Failure to disconnect power source can result in fire, shock or serious injury. B. Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction. C.
1. PRODUCT INTRODUCTIONS Air curtains are widely installed at the entrances of supermarket, theater, meeting room, hotel, office room, storeroom etc. They can reduce penetration of insects, dust…unconditioned air into a conditioned space by forcing an air stream over the entire entrance to create a comfortable environment for you. 2. INSTALLATION DIMENSIONS UNIT: inch MODEL A CF35-C 35.43 CF47-C 47.24 CF59-C 59.06 B 1.18 C D E 11.42 22.05 --- 16.93 10.63 16.93 22.40 10.63 22.
3. INSTALLATION CAUTIONS Must observe the following when installing air curtains: 3.1 Please install the unit on a sturdy supporting structure to avoid shaking and ensure its security (because the unit running may cause the wall to become loose or shake and make noise). 3.2 Please install the unit inside the room. 3.3 Don’t install the unit too low, no less than 2.5 meters from the ground. ATTENTION ： INSTALLER DE SORTE QUELES PIECES INFERIEURES SOIENT A AU MOINS 2.
4. INSTALLATION INSTRUCTIONS A. Installing on the concrete wall: 4.1.1 Unscrew the mounting plate and remove it from the back of the main body. 4.1.2 Determine the mounting location with the mounting plate. Fix the bolts in place and pour cement into the bolt holes. 4.1.3 Fix the mounting plate to the wall after cement setting (use the washers and nuts as the Fig shows). 4.1.4 Mount the main body onto the mounting plate as the Fig shows and screw it back to the mounting plate. B.
C. Installing from the ceiling: 4.3.1 Remove the mounting plate from the main 4.3.2 Fix the ceiling brackets as the Fig shows. body as per the step 4.1.1 4.3.3 Fix the mounting plate to the ceiling 4.3.4 Same as the step 4.1.4 brackets and tighten it securely as the Fig shows. The position of the mounting plate can be adjusted in vertical direction according to need, but the max distance is 100mm. 5. TECHNICAL PARAMETER Model No.
6. WIRING DIAGRAM BLUE (YELLOW) ORANGE C YELLOW BLACK 1 Lo 2 OFF 3 Hi N L K WHITE THERMAL CUT-OUT GREEN DOUBLE SPEED SWITCH WIRING DIAGRAM 7. OPERATING INSTRUCTIONS 7.1 Connect power to the unit. 7.2 Push the power switch to the left/right to switch on the unit. [L] - Low speed, [H] - High speed. 7.3 Adjust the air deflector to obtain optimum effect. 8. MAINTENANCE AND CLEANING WARNING: A.
