Guest Network You can create and share a separate network for guests to guarantee the security and privacy of your main network. Tap > Wi-Fi and enable Guest Network. Set a Wi-Fi name and password for the guest network. Share your guest network with others.
Network Optimization Network Optimization lets your Deco intelligently scan for a clearer channel and switch your devices to it, ensuring optimal Wi-Fi performance. Tap > Network Optimization. The app will scan the network automatically. Optimize your network for optimal Wi-Fi performance. Enjoy your time if your network status is perfect.
Blacklist Add devices to the blacklist to prevent the devices from accessing your network, ensuring the safety of your personal information shared in the network. Tap > Blacklist. Tap + and add clients or other devices to the blacklist. Remove devices/clients from blacklist.
Upgrade Your Deco TP-Link is dedicated to improving product features and providing a better customer experience. An up-to-date firmware provides better and more stable network performance. Always update your Deco to the latest firmware version when prompted in the Deco app. 1. Tap > Update Deco 2. Download and install the firmware (if any) and follow app instructions to update your Deco to the latest version.
Advanced Features Additional features are available under the Advanced menu.
Modify LAN IP to avoid IP address confict. Change DHCP server settings. Enable IPTV/VLAN mode to support Enable MAC Clone if Deco fails to IPTV services. connect to the internet. Tip: For more about MAC Clone, refer to https://www.tp-link.
Reserve IP addresses for specific devices to recognize and manage the device more easily. Set up port forwarding rules to enable devices in your network accessible over the internet with safety. Register a TP-Link DDNS domain name to access your router and local servers using a domain name. Enable SIP ALG to communicate with SIP (Session Initiation Protocol) servers via NAT).
Enable UPNP to allow your local network to dynamically open ports for applications like gaming. Enable Fast Roaming to allow your wireless devices to switch connection to different Decos. Enable Beamforming to concentrate Toggle off LED to turn off the light on Wi-Fi signal towards connected Deco. Configure the Night Mode to devices for stronger connections. turn off the LED light at bedtime only.
Change the operation mode. Note: When the Deco works in Access Point mode, advanced features such as IPv4, Address Reservation, Port Forwarding, and DHCP server are not available. Set connection alerts to receive Set notifications to receive alerts in notifications once the clients the notification bar. connect to or disconnect from Deco.
WPS WPS (Wi-Fi Protected Setup) helps you to quickly and securely connect a client to the network with a tap without entering any password. 1. Tap > WPS. 2. Tap the WPS icon on Deco app and then on your client. 3. Your device has connected to the network successfully if shown as below.
Managers Add friends and family members to help manage your network. Each manager should have their own TP-Link ID. Note: Managers can not modify owner's account, add other accounts, or set manager privileges. Tap > Managers, and follow app instructions to add other TP-Link ID accounts as managers.
Set privileges for managers. Note: Privileges may vary slightly depending on the model, the current operation mode, and software version you have. Remove managers.
Control Your Deco with Alexa Alexa Integration allows you to control your Deco using Amazon’s Alexa voice service. You can control and customize your home network by giving simple voice commands to Alexa, such as enabling the Guest Network, turning off your Deco LEDs, and more. Follow the steps below to use Alexa voice commands to control your Deco network. Tip: To know more about how to set up Alexa Integration in Alexa app, refer to https://www.tp-link.com/support/faq/1571/.
Troubleshooting Solutions to common problems during setup or use are provided here for reference. Follow the steps and the provided link below to diagnose and solve problems you might experience with your Deco. If problems still exist, contact us: https://www.tp-link.com/support Q1. What should I do if I fail to configure the main Deco and get stuck on “We couldn't find Deco”? Refer to the guide https://www.tp-link.com/support/faq/2239/ or follow the video https://youtu.be/2HYuEYS9XJM Q2.
Authentication FCC Compliance Information Statement Product Name: AX3000 Whole Home Mesh Wi-Fi 6 System Model Number: Deco X50 Component Name I.T.E POWER SUPPLY Component Model T120120-2B4 Responsible party: TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 92618 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: sales.usa@tp-link.
• Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Compliance Information Statement Product Name: I.T.E POWER SUPPLY Model Number: T120120-2B4 Responsible party: TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 92618 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY(the maximum transmitted power) 2412MHz—2472MHz (20dBm) 5150MHz—5350MHz (23dBm) EU Declaration of Conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863.
UKCA Mark UK Declaration of Conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca/ National restrictions Attention: This device may only be used indoors in Great Britain. UK Canadian Compliance Statement This device complies with Industry Canada license-exempt RSS standard(s).
Caution: The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; DFS (Dynamic Frequency Selection) products that operate in the bands 5250- 5350 MHz.
前述合法通信，指依電信管理法規定作業之無線電通信。 低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 應避免影響附近雷達系統之操作。 安全諮詢及注意事項 • 請按照本產品注明的電源類型使用本產品。 • 注意防潮，請勿將水或其他液體潑灑到本產品上。 • • • • 清潔本產品之前請先切斷電源。請勿使用液體、噴霧清潔劑或濕布進行清潔。 插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。 請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。 不要私自拆開機殼或自行維修，如產品有故障請與原廠或代理商聯繫。 限用物質含有情況標示聲明書 設備名稱： 型號（型式）： Equipment name: Type designation (Type) 單元 Restricted substances and its chemical symbols 鎘 六價鉻 多溴聯苯 AX3000 Whole Home Mesh Wi-Fi 6 System Unit Deco X50 限用物質及其化學符號 鉛 Lead (Pb)
備考1. 超出0.1 wt %” 及 “超出0.01 wt %” 系指限用物質之百分比含量超出百分比含量基準值。 Note 1：“Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 備考2.“○”系指該項限用物質之百分比含量未超出百分比含量基準值。 Note 2：“○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 備考3.
other implanted medical devices. If you suspect your product is interfering with your pacemaker or any other implanted medical device, turn off your product and consult your physician for information specific to your medical device. • Operating Temperature: 0°C~40°C (32°F~104°F) Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device.
