Application Guide
Table Of Contents
2
English
1 Install the antennas. If the antennas are
already fixed, move to the next step.
2 Turn off the modem, and remove the
backup battery if it has one.
3 Connect the modem to the Internet
(or WAN) port on your router with an
Ethernet cable.
4 Turn on the router, and wait for it to start.
5 Turn on the modem.
Configure via Web
Browser
1 Connect your computer to the router (Wired or
Wireless).
Wired:
Turn off the Wi-Fi on your computer and connect
your computer to the router’s LAN (1/2/3/4) port
using an Ethernet cable.
Wireless:
Connect your computer to the router wirelessly.
The SSID and Wireless Password are on the
router’s label.
2 Enter http://tplinkwifi.net or http://192.168.0.1
in the address bar of a web browser. Create
a password for future login attempts, or use
admin for both username and password for
some routers.
Note: If the login window does not appear, please
refer to FAQ > Q1.
3 Go to Quick Setup page, and follow the step-
by-step instructions to complete the initial
configuration.
Enjoy!
Now your wired and wireless devices can
connect to the internet !
Note: If you have changed the SSID and wireless
SDVVZRUGGXULQJWKHFRQƮJXUDWLRQXVHWKHQHZ66,'
and wireless password to join the wireless network.